78 en Web Client Software | Digital Video Recorder 440/480 Series |
|
|
3.Click and hold the left and right arrows to pan.
4.Release the mouse button to stop camera movement controls.
Zoom, focus, and iris
To control the zoom, focus, and iris of PTZ cameras:
1.Select the cameo of the camera to be controlled.
2.Click and hold the left zoom button 
to zoom out; click and hold the right zoom
button 
to zoom in.
3.Click and hold the left focus button 
for far focus; click and hold the right focus
button 
for near focus.
4.Click and hold the left iris button 
to close the iris; click and hold the right iris
button 
to open the iris.
5.Release the mouse button to stop camera adjustment controls.
Pre-position
To move the active camera to a
1.Enter a
2.Click Shot (or press enter).
Click buttons one to six for immediate positioning to one of the first six
To store the current position of the camera in a
1.Position the camera.
2.Enter a
3.Click Set.
Aux commands
Aux commands are special commands for controlling cameras. To switch on the Aux command:
1.Enter an Aux number.
2.Click Aux + (or press enter).
3.To switch off the Aux command, click Aux
7.4.2 | Camera views |
|
| ||
| To switch the display mode, click one of the camera view | buttons to | |||
| change the cameo display configuration: |
| |||
| – | Single | view, Quad | view, and Sequence | display modes are available. |
| – | Full Screen | expands the current display mode to fill the entire screen. Press ESC to | ||
|
| exit Full Screen. |
|
| |
| Installation and Operation manual | Bosch Security Systems |