Bosch Appliances DVR 440, DVR 480 operation manual 6System, 1Date/Time, 2NTP, 3Beeper

70 en Configuration menu Digital Video Recorder 440/480 Series

6.6System

6.6.1Date/Time

Figure 6.20 System -Date/Time

1.Enter the actual Date.

2.Fill in the actual Time.

3.Select a Date format which shows either the month (MM), the day (DD), or the year

(YYYY)first.

4.Select either a 12-hour or a 24-hour clock Time format.

5.Select a Time zone from the list (daylight saving time must be set manually).

6.Set Daylight Saving to On to enable it. Fill in the day, month, and time of both Start and End time, and the Offset if it differs from the information associated with your time zone.

6.6.2NTP

The Time server function synchronizes the time of the unit with the time of a network time server or another NTP-capable device. Choose either a Public Server to use a calibrated NTP server on the Internet, or select a Private Server to set your own time source. Fill in the IP address of the private network time server. Ensure that firewalls do not block NTP traffic via UDP port 123.

1.Press NTP Test to start time synchronization.

2.Set the Synchronization Interval to keep the unit closly matched with the time source.

– Intervals can be as frequent as hourly, or as long as monthly.

6.6.3Beeper

Select when the unit will Beep:

–On every Button press

–When the unit is triggered by an Input, Motion, System failure, or Video loss.

AM18-Q0605 v2.0 2012.04 Installation and Operation manual Bosch Security Systems