5.2 Clearing commands
5.2.1Clearing all learned commands under a mode
Clearing learned commands can be useful if, for example, you replace your CD player with another brand or model. If you had learned a feature from your old CD player’s original remote control on to this remote control (such as RANDOM PLAY), that feature would no longer work for your new CD player.
1Press and hold the SETUP button until the red light indicator turns on, then release the button.
2Press and release the Mode button for the mode you wish to clear learned functions from (TV, DVR, etc.).
•The red light indicator flashes off.
3Press and release the LEARN button twice.
•The red light indicator flashes off.
4Press and release the SETUP button.
•The red light indicator turns off.All learned commands under that mode are now cleared.
Keep updated for future devices English
5.2.2Master clear - Clearing all learned commands under all modes
1Press and hold the SETUP button until the red light indicator turns on, then release the button.
2Press and release the LEARN button twice.
•The red light indicator flashes off.
3Press and release the SETUP button.
•The red light indicator turns off. All learned commands, stored in the remote control memory have now been cleared.
5.3 Tips on learning
You can only learn one device type under a Mode button. For example, you can only learn TV codes under the TV mode button, DVR codes under the DVR mode button, etc. If you are trying to learn from a ‘universal’ remote control, it might have more than one code type stored under a Mode button.
Try learning from another remote control to see if there’s a problem with the type or brand of remote control you are trying to learn from.
•Some functions from some types of remote controls might not be learned.
•No functions may be stored under the LEARN, SETUP or BACKLIGHT ( ) buttons.
•Only one original device type can be learned per individual mode.
•Use fresh batteries for both the SRU5108 and the original remote control.
•Keep at least three feet away from incandescent or low- energy lights when learning.
•Place both remote controls on a flat surface (like a coffee table) and aim them in such way that the IR transmitter of the original remote control points at the IR transmitter of the SRU5108.
•Keep about 1 inch in between the remote controls. You may need to adjust the height of one of the remote controls to achieve this.
EN 11
129238_SRU5108_Short.indd 11 |