Philips DVDR80/99 owner manual Connecting to a TV Only TV has Component Video In Jacks

Page 12

12 Hookups (cont’d)

Connecting to a TV Only

TV has Component Video In Jacks

Back of TV

(example only)

Antenna

or Cable TV

Signal

RIGHT AUDIO IN

Pr/Cr

LEFT AUDIO IN

Pb/Cb

 

Y

IN - EXT 2

IN - EXT 1

OUT 2

OUT 1 480p/480i

DIGITAL AUDIO OUT

G-LINK DIGITAL AUDIO OUT

VIDEO

AUDIO COMPONENT

VIDEO

AUDIO COMPONENT

COAX OUT

OPTICAL OUT

(CVBS)

VIDEO

(CVBS)

VIDEO

 

 

ANTENNA

Y

 

Y

 

 

 

 

 

 

S-VIDEO

 

S-VIDEO

 

(Y/C)

L

(Y/C)

L

 

 

PB

 

TV

AUDIO

 

 

R

PR

R

 

 

 

PB

PR

MAINS

1 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the Recorder.

2 Connect the Recorder’s OUT 1 COMPONENT VIDEO Y PB PR jacks to the COMPONENT VIDEO IN jacks on the TV. Use the sup- plied three-strand component video cable, which has red, blue, and green markings. Match the cable colors to the jack colors.

3 Connect the Recorder’s OUT 1 AUDIO L/R (left/right) jacks to the left/right AUDIO IN jacks on the TV. Use the supplied two-strand audio cable, which has red and white markings. Match the cable colors to the jack colors.

4 Connect the supplied power cord to the MAINS ~ (AC Power) jack on the rear of the Recorder.

Connect the power cords of the Recorder and the TV to a power outlet.

5 Press STANDBY-ON y on the front of the Recorder to turn it on. “IS TV ON? CH03” will appear on the Recorder’s display panel the first time you turn on the Recorder.

6 Turn on the TV. Set it to the Component Video In channel, not chan- nel 3 or 4. (See your TV manual for details. Or, go to your lowest TV channel and change channels down until you see the DVD background picture or Initial Setup screens.) Initial Setup will appear the first time you turn on the Recorder. Go to pages 18-20 to complete Initial Setup.

Helpful Hints

•If your TV has Progressive Scan (Pro Scan), connect the Recorder’s OUT 1 COMPO- NENT VIDEO Y PB PR jacks to the TV’s Progressive Scan In jacks instead. Pro Scan doubles the number of visible picture lines per field, providing a jitter-free, sharp, quiet picture. See your TV manual for details. If you use Pro Scan, set the Recorder’s Video Output to Progressive Scan. See page 58.

•On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be green, blue, and red.

•To watch TV with the Recorder off, connect the RF coaxial cable to the Recorder’s TV jack and to the RF IN or ANTENNA IN jack (75 ohm) on your TV. This lets you watch channels at the TV when the Recorder is off and will improve TV reception. See page 10 for this hookup.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DVDR80 Dear Philips product owner Remember, to get the most from your Philips prodCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Safety Information cont’d Example of Antenna Grounding per National Electrical CodeIntroduction Playable Discs Discs for Recording and PlayingDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Hookups Determining the best possible connectionBefore you begin RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Connecting to a TV A Stereo with red/white Audio In jacks Stereo DV S-VIDEO Video Audio Left Right Initial Setup Instructions continue on the nextInitial Setup cont’d Helpful HintGuide Plus+ System Setup Press OK to continuePress Standby y to turn off the Recorder later. Leave the Cable Box turned onQuick Recording Press Monitor to see TV channels through the RecorderTo select an item, then press OK. Continue until you set up Quick Disc PlayPress OPEN/CLOSE a again to close the tray Play may start automatically. If notTitle/Disc menus Chapter/Track SelectionPress Disc Menu during Disc play Remote Control Play Mode Button TV Volume +/- ButtonsDisc Manager Button Standby y ButtonFront Panel Rear Panel 98 symbols in the Menu Bar mean more items are available Menu BarsMenu Bar On-screen Symbols, Status Box On-screen SymbolsStatus Box Disc status iconsTimer Information box Information BoxesTuner Information box Title Settings Menu Index Picture ScreenTitles Disc BarClock Press System MENU. Press to selectPress 9CH- repeatedly to select Press 9CH- repeatedly to select Time/Date, then pressChannel Programming One-Touch Recording To erase a recording, see Erase this title details onTitle or erase the chosen Title from the Disc Press OK to start Disc play at the Title you selectedErase this title Press to return to the Index Picture Screen if necessaryAppend recording Record One Channel/Watch AnotherRecord Settings Mode Picture quality Recording time per DiscChapter Markers Recordings and the maximum recording time for a DiscEditing Disc Information Screen Editing This option is not always availablePress FSS $ to remove the menu if necessary Finalize Disc Disc Manager Add current discRemove disc Press Play to close the disc tray and remove the DiscDisc Manager cont’d Find titleBrowse discs SETUPReview Guide Plus+ System cont’d Change Channel DisplayReview Options Press GUIDE/TVListings SortTimer Recordings Timer Recording TipsPress Timer X to access the Record screen in the Guide Plus+ SystemSchedule Messages and PromotionsAudio Language, Subtitles Audio LanguageSubtitles Zoom, Camera Angle ZoomCamera Angle During DVD play, press the Green Angle Button to SelectSound, Still Picture SoundStill Picture Press System Menu to remove the Menu BarSlow Motion SearchingPause k on the remote to pause the picture Time Search, Scan Time SearchScan Press the Number buttons to enter the time at which youRepeat, Repeat A-B RepeatRepeat A-B Access Control Change CodeTwice.This will set your code for the first time Press System Menu to remove the menuChild Lock Locking or Unlocking Specific DiscsAccess Control cont’d Parental LevelChange Country Enter the four-digit code to play the DiscSee the Status boxes. Choose Off if you do not want to see Status boxes. SeePicture Settings Analog Output, Digital Output Analog OutputDigital Output Press 9CH- repeatedly to select G, then pressLanguage Settings SAPNight Mode Remote Control UsedAuto Resume, Playback Control Auto ResumePlayback Control Glossary Helpful Hints Helpful Hints contd Diagnostic Test, Specifications Diagnostic TestSpecifications Renewed Information Index Component video24-25 Video cvbs
Top Page Image Contents