Philips DVDR80/99 owner manual Channel Programming

Page 33

Channel Programming 33

In the brief period between your Initial Setup of the Recorder and the setup of the GUIDE Plus+® System, you can adjust the TV channel listings. This option will not be available for selection once the GUIDE Plus® System is in use and receiving programming data.The GUIDE Plus® System will override any channel settings you make manually.

1 Press SYSTEM MENU. Press ; to select in the top left corner of the Menu Bar at the top of the TV screen.

2 Press 9CH- repeatedly to select at the end of the second menu page. Press :.

Installation

K

u B Auto Ch. Programming B

LAdd/Delete Channels Time/Date Cable/Antenna

To exit press

SYSTEM MENU

3 Press 8CH+ or 9CH- to select Auto Ch. Programming, then press OK. “Searching for TV channels” will appear, along with a scale showing channels that are being memorized.The number of channels found will show on the screen as the searching progresses. This will take a few minutes, depending on the channels available.

1-6

1,4,7

REC/OTR

 

STANDBY

 

 

 

TIMER

REC MODE PLAY MODE

TV/DVD

MONITOR

DIM

RETURN

T/C

•TV

 

 

 

i

DISC MANAGER FSS

SELECT

SUBTITLE

AUDIO

ANGLE

ZOOM

`

 

 

 

 

 

 

 

GUIDE/TV

DISC

 

CH+

 

 

 

 

OK

 

 

SYSTEM

 

CH-

 

 

STOP

 

PLAY

TV VOLUME

Ç

 

 

 

 

 

SLOW

PAUSE

 

H

 

 

k

G

4 When the channel search finishes, “Auto ch. search complete” will appear, along with the total number of channels found.

Press SYSTEM MENU. The Installation menu will reappear.

If you are satisfied with the channels found, press SYSTEM MENU again to remove the menu. You are finished.

To add or delete additional channels, press 8CH+ or 9CH- to select Add/Delete Channels, then go to step 5.

CLEARMUTE

5 Press :. A channel list will appear. Beside each channel number, you will see “Delete” or “Add.”

Installation

Add/Delete Channels

K K...

u Channel 001

s Delete

B

L Channel 002

Add

 

Channel 003

Add

 

Channel 004

Add

 

Channel 005

Add

 

Channel 006

Add

 

L...

 

 

 

To exit press

 

 

SYSTEM MENU

 

6 Press 8CH+ or 9CH- to select the channel number you want to add or delete, then press ; or : to choose Add or

Delete for that channel. Press OK to store your choice. Repeat to add or delete other channels.

7 Press SYSTEM MENU repeatedly to remove all the menus when you are finished.

Helpful Hints

•Only added channels are accessible using CH+8/CH-9. Select deleted channels with the Number buttons instead.

•The Recorder detects whether you have an Antenna or Cable TV signal. If you are receiving limited channels, check the

Cable/Antenna setting. Follow steps 1-2 above. Press CH-9

to choose Cable/Antenna, then press OK. Press CH+8 or CH- 9 to choose Cable or Anten.

Press OK, then press SYSTEM MENU. Press OK again to reset the channels.When the channel search ends, press SYSTEM MENU.This is not available once the GUIDE Plus+® System controls the channel list.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents DVDR80 Remember, to get the most from your Philips prod Dear Philips product ownerCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dIntroduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Determining the best possible connection HookupsBefore you begin RememberHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Connecting to a TV A Stereo with red/white Audio In jacks Stereo DV S-VIDEO Video Audio Left Right Instructions continue on the next Initial SetupHelpful Hint Initial Setup cont’dPress OK to continue Guide Plus+ System SetupPress Standby y to turn off the Recorder later. Leave the Cable Box turned onPress Monitor to see TV channels through the Recorder Quick RecordingQuick Disc Play To select an item, then press OK. Continue until you set upPress OPEN/CLOSE a again to close the tray Play may start automatically. If notTitle/Disc menus Chapter/Track SelectionPress Disc Menu during Disc play Remote Control TV Volume +/- Buttons Play Mode ButtonDisc Manager Button Standby y ButtonFront Panel Rear Panel 98 symbols in the Menu Bar mean more items are available Menu BarsMenu Bar On-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsTimer Information box Information BoxesTuner Information box Index Picture Screen Title Settings MenuTitles Disc BarPress System MENU. Press to select ClockPress 9CH- repeatedly to select Press 9CH- repeatedly to select Time/Date, then pressChannel Programming To erase a recording, see Erase this title details on One-Touch RecordingPress OK to start Disc play at the Title you selected Title or erase the chosen Title from the DiscErase this title Press to return to the Index Picture Screen if necessaryRecord One Channel/Watch Another Append recordingMode Picture quality Recording time per Disc Record SettingsChapter Markers Recordings and the maximum recording time for a DiscEditing Disc Information Screen Editing This option is not always availablePress FSS $ to remove the menu if necessary Finalize Disc Add current disc Disc ManagerRemove disc Press Play to close the disc tray and remove the DiscDisc Manager cont’d Find titleBrowse discs SETUPReview Change Channel Display Guide Plus+ System cont’dReview Options Press GUIDE/TVSort ListingsTimer Recording Tips Timer RecordingsPress Timer X to access the Record screen in the Guide Plus+ SystemMessages and Promotions ScheduleAudio Language, Subtitles Audio LanguageSubtitles Zoom Zoom, Camera AngleCamera Angle During DVD play, press the Green Angle Button to SelectSound Sound, Still PictureStill Picture Press System Menu to remove the Menu BarSlow Motion SearchingPause k on the remote to pause the picture Time Search Time Search, ScanScan Press the Number buttons to enter the time at which youRepeat, Repeat A-B RepeatRepeat A-B Change Code Access ControlTwice.This will set your code for the first time Press System Menu to remove the menuLocking or Unlocking Specific Discs Child LockParental Level Access Control cont’dChange Country Enter the four-digit code to play the DiscStatus boxes. See See the Status boxes. Choose Off if you do not want to seePicture Settings Analog Output Analog Output, Digital OutputDigital Output Press 9CH- repeatedly to select G, then pressSAP Language SettingsRemote Control Used Night ModeAuto Resume, Playback Control Auto ResumePlayback Control Glossary Helpful Hints Helpful Hints contd Diagnostic Test, Specifications Diagnostic TestSpecifications Renewed Component video Information Index24-25 Video cvbs
Top Page Image Contents