Philips DVDR80/99 One-Touch Recording, To erase a recording, see Erase this title details on

Page 34

34 One-Touch Recording

1 Place a recordable DVD+RW or DVD+R in the Recorder.

2 In the Index Picture Screen of a DVD+RW, press 8CH+ or 9CH- to select an Empty Title (or empty Index Picture box) that has enough time for the recording. Or, select the place at which you want to start the new recording in order to overwrite other recordings. See page 36.

You may skip this step if you use Safe Record. See step 5.

Or, if you are using a DVD+R, you may skip this step. Recordings on a DVD+R are made at the end of the Disc automatically. Previous recordings are not overwritten.

3 Press MONITOR to see TV channels through the DVD Recorder.

4 Press 8CH+, 9CH-, or Number buttons to select a channel to record. You cannot change channels during recording.

If you are using a Cable Box/Satellite Receiver that has a single RF Out/TV Out/Antenna Out/75 ohm jack, set the DVD Recorder to channel 3 or 4 in Monitor mode. (Choose the output channel of your Cable Box/Satellite Receiver.)

If your Cable Box/Satellite Receiver has Audio/Video Out jacks, set the Recorder to an EXT channel. Choose the EXT channel that cor- responds to the jacks you used on the rear of the DVD Recorder (the jacks to which you connected the Cable Box/Satellite Receiver). Then, change TV channels at the Cable Box/Satellite Receiver.

5 Press REC/OTR I twice to start a 30-minute recording. Press REC/OTR I repeatedly to record longer segments in thirty-minute increments.The length of recording available depends on the current recording mode/speed and the amount of time avail- able on the Disc. See page 37. Recording will begin soon after you press REC/OTR I.The Disc takes a few seconds to prepare for recording.

Or, use Safe Record to have the Recorder automatically find the empty space at the end of a DVD+RW; this prevents overwriting other recordings.To do so, press and hold REC/OTR I for about two seconds, or until SAFE REC appears on the Recorder’s display panel.Then, press REC/OTR I repeatedly to choose the time length you want for your recording.

6 Press STOP C if you need to stop the recording before the designated end time. Otherwise, the Recorder will automatically stop recording at the designated end time and turn itself off.

Or, if you only pressed REC/OTR I once, the Recorder will record the current channel or source until the end of the Disc is reached. Then the Recorder will turn itself off.

●To play a DVD+R on another DVD Player, finalize the Disc. Follow the steps on page 40.You cannot record or edit a DVD+R after you finalize it.

●To edit your recordings, see pages 35 and 38-39. However, editing changes may not be accessible when you play the Disc on other DVD Players.

●To erase a recording, see “Erase this title” details on page 35.

5

REC/OTR

STANDBY

 

 

 

TIMER

REC MODE PLAY MODE

TV/DVD

3

MONITOR

DIM

RETURN

T/C

•TV DISC MANAGER FSS

SELECT

 

i

 

SUBTITLE

AUDIO

ANGLE

 

ZOOM

 

`

 

 

 

 

2,4

 

 

 

GUIDE/TV

DISC

 

OK

 

 

 

 

CH+

 

 

6

SYSTEM

 

CH-

 

 

STOP

PLAY

TV VOLUME

Ç

 

 

 

 

 

SLOW

PAUSE

 

 

 

H

 

k

 

G

4

CLEARMUTE

Helpful Hints

•“Disc locked” will appear on the TV if a protected DVD+RW or DVD+R is in the Recorder.

•If the power fails during record- ing, the Index Picture Screen may not match the actual video con- tent on the Disc.The last record- ed Title may be lost. A power fail- ure or unit failure/system crash also may destroy all the material recorded on a Disc.

•When the Disc is full,“End of Disc” will appear on the TV. DISC FULL will show on the Recorder’s display panel.

•Press SYSTEM MENU during recording to access or remove the Status,Tuner, or Timer Information box. See pages 29-30.

•The recommended operating temperature range for the Recorder is 32°F-122°F for DVD+RW recording and 32°F- 104°F for DVD+R recording. Exceeding these ranges may cause unstable recording results.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DVDR80 Card within 10 days. So please mail It to us right now Dear Philips product ownerRemember, to get the most from your Philips prod For Customer UseContents Safety Information Safety Information cont’d Example of Antenna Grounding per National Electrical CodeIntroduction Discs Unsuitable for Recording or Playing Playable DiscsDiscs for Recording and Playing Discs for Playing OnlyGeneral Information Before you begin HookupsDetermining the best possible connection RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Connecting to a TV A Stereo with red/white Audio In jacks Stereo DV S-VIDEO Video Audio Left Right Initial Setup Instructions continue on the nextInitial Setup cont’d Helpful HintPress Standby y to turn off the Recorder later. Guide Plus+ System SetupPress OK to continue Leave the Cable Box turned onQuick Recording Press Monitor to see TV channels through the RecorderPress OPEN/CLOSE a again to close the tray To select an item, then press OK. Continue until you set upQuick Disc Play Play may start automatically. If notChapter/Track Selection Title/Disc menusPress Disc Menu during Disc play Remote Control Disc Manager Button Play Mode ButtonTV Volume +/- Buttons Standby y ButtonFront Panel Rear Panel Menu Bars 98 symbols in the Menu Bar mean more items are availableMenu Bar Status Box On-screen Symbols, Status BoxOn-screen Symbols Disc status iconsInformation Boxes Timer Information boxTuner Information box Titles Title Settings MenuIndex Picture Screen Disc BarPress 9CH- repeatedly to select ClockPress System MENU. Press to select Press 9CH- repeatedly to select Time/Date, then pressChannel Programming One-Touch Recording To erase a recording, see Erase this title details onErase this title Title or erase the chosen Title from the DiscPress OK to start Disc play at the Title you selected Press to return to the Index Picture Screen if necessaryAppend recording Record One Channel/Watch AnotherChapter Markers Record SettingsMode Picture quality Recording time per Disc Recordings and the maximum recording time for a DiscEditing Disc Information Screen This option is not always available EditingPress FSS $ to remove the menu if necessary Finalize Disc Remove disc Disc ManagerAdd current disc Press Play to close the disc tray and remove the DiscFind title Disc Manager cont’dBrowse discs SETUPReview Review Options Guide Plus+ System cont’dChange Channel Display Press GUIDE/TVListings SortPress Timer X to access the Record screen in the Guide Timer RecordingsTimer Recording Tips Plus+ SystemSchedule Messages and PromotionsAudio Language Audio Language, SubtitlesSubtitles Camera Angle Zoom, Camera AngleZoom During DVD play, press the Green Angle Button to SelectStill Picture Sound, Still PictureSound Press System Menu to remove the Menu BarSearching Slow MotionPause k on the remote to pause the picture Scan Time Search, ScanTime Search Press the Number buttons to enter the time at which youRepeat Repeat, Repeat A-BRepeat A-B Twice.This will set your code for the first time Access ControlChange Code Press System Menu to remove the menuChild Lock Locking or Unlocking Specific DiscsChange Country Access Control cont’dParental Level Enter the four-digit code to play the DiscSee the Status boxes. Choose Off if you do not want to see Status boxes. SeePicture Settings Digital Output Analog Output, Digital OutputAnalog Output Press 9CH- repeatedly to select G, then pressLanguage Settings SAPNight Mode Remote Control UsedAuto Resume Auto Resume, Playback ControlPlayback Control Glossary Helpful Hints Helpful Hints contd Diagnostic Test Diagnostic Test, SpecificationsSpecifications Renewed 24-25 Information IndexComponent video Video cvbs
Top Page Image Contents