Philips DSR2010 manual Connecting to a TV and VCR both fitted with Scart sockets

Page 15

4.1Connecting to a TV and VCR both fitted with SCART sockets

Incorporate your receiver in your existing installation as described below.

English

-Connect the cable from the satellite dish to the “SAT IN” socket of your Digital-Receiver.

-Connect the “TV” SCART socket of your Digital-Receiver to the RGB capable SCART socket of your TV using the SCART lead supplied with your Digital-Receiver.

-Connect the “VCR” SCART socket of your Digital-Receiver to the “EXT1/OUTPUT” SCART socket of your VCR using a SCART lead.

-Plug all your equipment, excluding your Digital-Receiver, into the mains.

Note:

1- This connection also applies to DVD recorders fitted with one or two SCART sockets.

2- With this connection set up, you can:

-Watch digital TV while you record analogue TV.

-Watch analogue TV while you record digital TV.

-Record the digital TV channel you are watching.

-Watch Play Back from your VCR or DVD.

CONNECTING YOUR DIGITAL-RECEIVER 15

Image 15

Contents Page Foreword ForewordQuick Installation Meaning of symbols Safety and Environmental Instructions Safety and environmental instructionsTable of Contents EPG Product description UnpackingProduct Description Front panel Status indicator tableU I E R Rear panelInserting your Smartcard Insert the smartcard with the golden chip facing upInserting Your Smartcard Remote control Remote ControlInserting the batteries RED, GREEN,YELLOW Blue Using the remote controlConnecting Your DIGITAL-RECEIVER Connecting your Digital-ReceiverConnecting to a TV and VCR both fitted with Scart sockets Connecting to your audio equipment analogue or digital Connecting to a video projector to watch Digital TVAnalogue Connection a Digital Connection B First Installation First installationInstallation settings Channel search/Time settingSetting the correct time for summer or winter season Search failureBefore starting a new scanning You are watching digital TV or listening to digital radio Switch your receiver on or toDay-today operation Left-hand side LED is lit in redBanner Using number buttonsUsing P+/P- buttons Using channel listsChanging the current programme options Volume control / +Electronic Programme Guide EPG Recording timersSetting a timer from the banner Setting a timer from the EPGDeleting an active timer Viewing Teletext Switching to analogue TVPremiere features Premiere FeaturesPremiere Multifeed Premiere PIN code Menu system Menu treeMenu System LNB Basics Changing settingsCancelling/storing changes Menu navigationElectronic Programme Guide EPG Premiere Service MenuElectronic Programme Guide EPG Premiere PIN-Code ChangeScan Software UpgradeSmartcard SystemDisplay Dolby Digital out of the digital audio outputChannel List To set or edit a timer SettingsTimer Manager To delete an existing timerTo reorder your existing channel lists Channel ManagerList Organization To add or delete channel listsList Editing To remove channels from the selected listTo reorder channels in the selected list Channel Pool Display options To enable Parental LockYour Preferences For ParentsAdvanced settings TV SettingsTo modify your password System Information System SettingsCountry & Time Settings Decoder StatusDefault Settings Software UpgradeChannel Search Antenna Configuration LNB ConfigurationFilter Configuration Search for new channels Advanced Settings Other settingsRestoring default settings Changing the remote control settingConnecting your equipment for Easy Record Easy Record to enable VCR or DVD controlRecording with the VCR control feature Digital-Receiver and VCR or DVD settingsTroubleshooting Symptom Cause RemedyTroubleshooting Intermittent reception Faulty connections Technical Specifications Technical specificationsEnglish