Philips DSR2010 manual Setting a timer from the banner, Setting a timer from the EPG

Page 23

6.8.1Setting a timer from the banner

While watching TV or listening to the radio press <INFO> to display the banner.You have plenty of time to program your TIMER for the NOW or NEXT programme.

-Press the <TIMER> button once to set a recording timer on the current programme, i.e. programme instant recording. Press <TIMER> again to cancel the timer.

6.8.2Setting a timer from the EPG

-Press the <TIMER> button once to set a recorder on the next programme. Press the <TIMER> button once again to set a reminder on the next programme. Pres <TIMER> a third time to cancel the timer.

Note: in case the channel broadcasting the programme you want to set a timer on is locked, you will be prompted to enter your password.

To edit a timer from the EPG:

-Move the focus to the desired programme and press the <OK> button to access the Timer edition screen.

6.8.3Deleting an active timer

A timer is active; recording is signalled by the front panel LEDs lit respectively in red and orange.

To delete the active timer:

-If your receiver is in standby, press the front panel <+> or <-> button or the remote control <P+>, <P->, or <TV/RADIO> button, or any number button on the remote control to wake it up.The orange LED turns green.

-Press the key sequence <TIMER> + <0> to cancel the active timer.The red LED then goes out and you can change channels.

6.8.4Your receiver is blocked with the front panel LEDs lit respectively in red and orange/green

Your receiver is blocked because a recording is running. - Press successively <TIMER> then <0> to delete the

English

DAY-TODAY OPERATION 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents
Page Foreword ForewordQuick Installation Meaning of symbols Safety and Environmental Instructions Safety and environmental instructionsTable of Contents EPG Product Description Product descriptionUnpacking Front panel Status indicator tableU I E R Rear panelInserting Your Smartcard Inserting your SmartcardInsert the smartcard with the golden chip facing up Inserting the batteries Remote controlRemote Control RED, GREEN,YELLOW Blue Using the remote controlConnecting Your DIGITAL-RECEIVER Connecting your Digital-ReceiverConnecting to a TV and VCR both fitted with Scart sockets Analogue Connection a Digital Connection B Connecting to your audio equipment analogue or digitalConnecting to a video projector to watch Digital TV First Installation First installationInstallation settings Channel search/Time settingBefore starting a new scanning Setting the correct time for summer or winter seasonSearch failure You are watching digital TV or listening to digital radio Switch your receiver on or toDay-today operation Left-hand side LED is lit in redBanner Using number buttonsUsing P+/P- buttons Using channel listsChanging the current programme options Volume control / +Electronic Programme Guide EPG Recording timersDeleting an active timer Setting a timer from the bannerSetting a timer from the EPG Viewing Teletext Switching to analogue TVPremiere Multifeed Premiere featuresPremiere Features Premiere PIN code Menu System Menu systemMenu tree LNB Basics Changing settingsCancelling/storing changes Menu navigationElectronic Programme Guide EPG Premiere Service MenuElectronic Programme Guide EPG Premiere PIN-Code ChangeScan Software UpgradeSmartcard SystemChannel List DisplayDolby Digital out of the digital audio output To set or edit a timer SettingsTimer Manager To delete an existing timerTo reorder your existing channel lists Channel ManagerList Organization To add or delete channel listsTo reorder channels in the selected list List EditingTo remove channels from the selected list Channel Pool Display options To enable Parental LockYour Preferences For ParentsTo modify your password Advanced settingsTV Settings System Information System SettingsCountry & Time Settings Decoder StatusChannel Search Default SettingsSoftware Upgrade Filter Configuration Antenna ConfigurationLNB Configuration Search for new channels Advanced Settings Other settingsRestoring default settings Changing the remote control settingConnecting your equipment for Easy Record Easy Record to enable VCR or DVD controlRecording with the VCR control feature Digital-Receiver and VCR or DVD settingsTroubleshooting TroubleshootingSymptom Cause Remedy Intermittent reception Faulty connections Technical Specifications Technical specificationsEnglish