Philips DSR2010 Digital-Receiver and VCR or DVD settings, Recording with the VCR control feature

-Plug all your equipment, excluding your Digital-Receiver, into the mains.

-Read the Quick installation chapter to proceed with the channel scan if not already done.

With this connection set up:

-You can watch digital TV while you record analogue TV.

-You can watch analogue TV while you record digital TV.

-You can record the digital TV channel you are watching.

Note: some VCR or DVD recorders need to be in stand-by to use the Easy Record or Record link features. Refer to your VCR or DVD User manual.

12.3.2 Digital-Receiver and VCR or DVD settings

-Depending on your VCR or DVD brand and type, you have to set the “VCR recording control” option to “Prepare Record” or “Record Link”. Refer to the VCR or DVD User manual, or try the two options to find out which is most suitable.

-Set your VCR or DVD to “Prepare Record” or “Record Link” to allow control by your Digital- Receiver.

12.3.3 Recording with the VCR control feature

- Your Digital-Receiver,TV and VCR or DVD are connected and set according to paragraph 12.3.1.

-You have set a timer on your Digital-Receiver.

-At timer start, your VCR or DVD starts recording, and at timer end it stops recording under the control of your Digital-Receiver.You no longer need VCR or DVD programming to record digital TV channels.

English

ADVANCED SETTINGS 45