Philips DSR2010 manual Advanced settings, TV Settings, To modify your password

Page 38

English

Additionally, you may modify your receiver PIN-Code from this screen.

To modify your password:

-Press the red colour key to access the Password Change feature.

-Enter your current password.

Note: if you enter an incorrect password, a pop up screen appears. Enter your password again.

-Enter your new password using number buttons.

-Enter your new password again to confirm.

-Press <EXIT> to exit the Password Change screen.

11.5 Advanced settings

The Settings sub menu menu includes the following items:

o TV Settings

o System Settings

o Country & Time Settings

o Decoder Status

o Default Settings

11.5.1 TV Settings

This screen is used to set aspect ratio settings.

-Select values for the following:

TV screen format: default setting is 4:3. If you have a

16:9 screen TV, change this setting to 16:9 for optimal viewing.

Display format: set the way the video is transformed in case the broadcast aspect ratio is 16:9 your TV aspect ratio is 4:3.

-Press <OK> to confirm.

Aspect ratio

TV screen format = 4:3

Display format

Broadcast format = 16:9

 

 

 

LetterBox

full picture with black bars at the top

and bottom

 

 

 

Centre Cut Out

picture cut-out on the left and right

 

 

38SETTINGS

Image 38
Contents Page Foreword ForewordQuick Installation Meaning of symbols Safety and environmental instructions Safety and Environmental InstructionsTable of Contents EPG Product Description Product descriptionUnpacking Status indicator table Front panelRear panel U I E RInserting Your Smartcard Inserting your SmartcardInsert the smartcard with the golden chip facing up Inserting the batteries Remote controlRemote Control Using the remote control RED, GREEN,YELLOW BlueConnecting your Digital-Receiver Connecting Your DIGITAL-RECEIVERConnecting to a TV and VCR both fitted with Scart sockets Analogue Connection a Digital Connection B Connecting to your audio equipment analogue or digitalConnecting to a video projector to watch Digital TV Channel search/Time setting First installationInstallation settings First InstallationBefore starting a new scanning Setting the correct time for summer or winter seasonSearch failure Left-hand side LED is lit in red Switch your receiver on or toDay-today operation You are watching digital TV or listening to digital radioUsing channel lists Using number buttonsUsing P+/P- buttons BannerVolume control / + Changing the current programme optionsRecording timers Electronic Programme Guide EPGDeleting an active timer Setting a timer from the bannerSetting a timer from the EPG Switching to analogue TV Viewing TeletextPremiere Multifeed Premiere featuresPremiere Features Premiere PIN code Menu System Menu systemMenu tree LNB Menu navigation Changing settingsCancelling/storing changes BasicsPremiere PIN-Code Change Premiere Service MenuElectronic Programme Guide EPG Electronic Programme Guide EPGSystem Software UpgradeSmartcard ScanChannel List DisplayDolby Digital out of the digital audio output To delete an existing timer SettingsTimer Manager To set or edit a timerTo add or delete channel lists Channel ManagerList Organization To reorder your existing channel listsTo reorder channels in the selected list List EditingTo remove channels from the selected list Channel Pool For Parents To enable Parental LockYour Preferences Display optionsTo modify your password Advanced settingsTV Settings Decoder Status System SettingsCountry & Time Settings System InformationChannel Search Default SettingsSoftware Upgrade Filter Configuration Antenna ConfigurationLNB Configuration Search for new channels Changing the remote control setting Other settingsRestoring default settings Advanced SettingsEasy Record to enable VCR or DVD control Connecting your equipment for Easy RecordDigital-Receiver and VCR or DVD settings Recording with the VCR control featureTroubleshooting TroubleshootingSymptom Cause Remedy Intermittent reception Faulty connections Technical specifications Technical SpecificationsEnglish