Philips DSR2010 manual Front panel, Status indicator table

1.3Front panel

R

English

Q W E T U I Y

1Slot for stand positioning

2	Smartcard slot:	See chapter 4.
3	Stand-by button with red LED:	Switch the receiver “On” or to Stand-by.
		Indicate Stand-by when lit.
4	TV/RADIO button:	Toggle between digital TV and digital radio.
5	- button	Channel down
6	+ button	Channel up
7	Green LED:	Display receiver status (see status indicator table).
8	Red LED:	Display receiver status (see status indicator table).
		Blink at remote control command reception.

Status indicator table
Indicator	Red LED	Bicolour LED
Mode
Stand-by	red
TV mode		green
Radio mode		orange
Download in progress	Blinking red
Timer mode from running mode	red	green
Timer mode from stand-by	red	orange

Note: if you have put your receiver in “Stand-by” and the red LED is blinking, it indicates that an over-the-air upgrade of your receiver is taking place. Do not interrupt this operation. Wait until both LEDs lit up, indicating successful download.You can then continue as normal.

PRODUCT DESCRIPTION 9