Philips VRX362AT warranty On-Screen Status Displays, Pressed, Broadcast

Page 24

24 On-Screen Status Displays

A status display, which includes the current time, channel, and other information (see illustration), will appear when you press the STA- TUS/EXIT button or certain function buttons. The contents of the sta- tus display may vary. There are three status display modes:

ON SCREEN ON:

●Whenever you press the STOP button or the PLAY button, the sta- tus display will appear for five seconds.

COUNTER ONLY:

●Whenever you press the STOP button or the PLAY button, the sta- tus display will appear for five seconds. After five seconds, only the counter will remain on-screen. You must press the STATUS/EXIT button to remove it.

ON SCREEN OFF:

●The status display will not appear when you press function buttons. You must press the STATUS/EXIT button to see the status display.

To choose the status display mode, follow the steps below.

1

Press the VCR button, then press the MENU button to bring up the main menu display.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4SET CLOCK

TO END PUSH EXIT

2

Press the Number 2 button to select VCR SET UP.

TO SELECT PUSH NO. SHOWN

1 REPEAT PLAY

OFF

2ON SCREEN MODE

3AUDIO OUT

4LANGUAGE

5VCR PLUS+ REF. MAP

TO END PUSH EXIT

Function

Receiving and

Button

Recording Mode

Pressed

Time Channel

STOP

12:00 AM

TV STEREO

CH10

STEREO

2ND AUD

SLP

M

1:23:45

HIFI

Tape

Counter

Audio

Speed

and

Out

Counter

Mode

Memory

MTS

Broadcast

Available

3

Press the Number 2 button to select ON SCREEN MODE.

TO SELECT PUSH NO. SHOWN

1 ON SCREEN ON

ON

2COUNTER ONLY

3ON SCREEN OFF

TO END PUSH EXIT

4

Press the Number 1 button to select ON SCREEN ON, the Number 2 button to select COUNTER ONLY, or the Number 3 button to select ON SCREEN OFF. ON will appear beside the selected status display mode.

5

Press the STATUS/EXIT button to exit.

Helpful Hints

•If the channel you select has no broadcast, the screen will become solid blue. The screen will remain blue until you select an active chan- nel.

•You may bring up the status display at any time by pressing the STA- TUS/EXIT button.

(The exception is when viewing a still picture or a slow motion picture, or when F.FWD or REW(ind) is pressed during playback.)

•Channel numbers (when tuned) are displayed for a few seconds.

Image 24

Contents Video Cassette Recorder VRX362AT TM Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction UseTable of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Remove the battery compartment lid on the bottomHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Plug in the TV and the VCRTimer Recordings Hookups With a Cable BoxRecording/Viewing Any Channel Watching TV With the VCR OffConnect a Cable signal to the VCR’s ANTenna in Jack Hookups With a Cable Box cont’dRecording One Channel/Watching Another Playing a TapeHookups With a Stereo TV Turning on Your VCR Guage1Turn on the TV Press the Number 3 button to select Tuner SET UP Channel MemoryProgramming Channels Press the VCR buttonAdding/Deleting Channels Reviewing Programmed ChannelsUse the Number buttons to enter the channel number Setting the Clock Manual Clock SettingPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual ClockEnter a 0 before a single digit number Question mark ? to appear on-screenCorrect number Setting the Clock cont’d Automatic Clock SettingPress the VCR button, then press the Menu button to Bring up the main menu displayTime Zone Press the Number 4 button to select SET Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionPress the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 4 button to select LanguageFind your 2TV codePress and release the Mute button 2Find Find the brand of your Cable Box or Satellite System onRemote Control Buttons Play ButtonRemote Control Buttons cont’d Press the Number 2 button to select on Screen Mode On-Screen Status DisplaysTo choose the status display mode, follow the steps below PressedVCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tapePress the VCR button on the remote control RecordingStart a recording see Press the Stop button to stop the recordingChannels are programmed With the Tape Speed buttonIntact and the tape is long enough to record the programs Does not appear, press the VCR/TV button onceTimer Recording DailyRecording Menu ScreenTimer Recording cont’d Enter the recording’s stop timeTimer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings Menu button Press the Number 1 button to select ProgramSee page 50 for more hints Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Press the VCR button, then press the Menu button Press the Number 5 button to select VCR PLUS+ REF. MAPPanel of the VCR. If it does not, press the VCR/TV button OnceTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchReal Time Counter Memory Real Time Counter MemorySpecial Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features MTS Broadcast Stereo System Understanding On-Screen DisplaysSpecifically… MonitorMTS Broadcast Stereo System cont’d Hi-Fi Stereo Sound System Press the Number 3 button to select Audio OUTPlease see additional notes Hi-Fi Stereo Sound System cont’d Press the STATUS/EXIT button to exitHelpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel Channel 3 orSpecifications Renewed Index Supplied Accessories