Philips VRX362AT warranty Hi-Fi Stereo Sound System, Press the Number 3 button to select Audio OUT

48 Hi-Fi Stereo Sound System

Multi-Channel Television Sound System broadcasts are automati- cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes recorded in Hi-Fi stereo, however, you’ll need to follow the steps below.

1

Press the VCR button, then press the MENU button.

2

POWER VCR TV

4 1 2 3

4 5 6

7 8 9

VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE

CABLE /DSS

VCR/TV

CHANNEL

VOLUME

3

2

Press the Number 2 button to select VCR SET UP.

TO SELECT PUSH NO. SHOWN

1 REPEAT PLAY OFF

2ON SCREEN MODE

3AUDIO OUT

4LANGUAGE

5VCR PLUS+ REF. MAP

TO END PUSH EXIT

3

Press the Number 3 button to select AUDIO OUT.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

4

Press the Number 1 button to select HIFI. ON will appear to the right of HIFI on-screen.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

5

Press the STATUS/EXIT button to exit.

		PLAY
	– REW			F.FWD +
		STOP
1	REC/OTR	MEMORY	SLOW	PAUSE/STILL
	MENU	STATUS/EXIT	CLEAR	5
				EJECT

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1 - 3 above. At step 4, press the Number 2 button to select MONO. Press the STATUS/EXIT button to exit. HIFI will disappear from the status display.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disap- pear from the status display and the tape will play in monaural sound.

Please see additional notes

on page 51.