Philips VRX362AT warranty Hookups With a Cable Box cont’d, Recording One Channel/Watching Another

Page 9

Hookups With a Cable Box (cont’d) 9

This connection allows you to program an unattended recording of more than one unscram- bled channel and to watch one channel while recording another. After you connect the VCR, Cable Box, and TV as shown below, the features on this page will be available.

1.Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

AUDIO		ANT
AUDIO		IN
	L
	R
VIDEO		OUT
OUT	IN CH3	CH4

2.Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box.

TV ANTENNA IN Jack

3.Use a second RF coaxial cable to connect the OUT Jack on the Cable Box to the ANTENNA IN Jack on the back of the TV.

Recording One Channel/Watching Another

1

With the VCR in VCR position (the VCR light will appear on the display panel), use the CHANNEL (Up/Down) buttons to select the channel you want to record. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)

3

Use the TV channel selector to put the TV on the Cable Box output channel (channel 3 or 4).

4

Select the channel you want to watch at the Cable Box.

Playing a Tape

1

Press the VCR/TV button to put the VCR in VCR position (the VCR light will appear on the display panel).

2

Make sure the Cable Box is on the same channel as the

VCR’s CH3/CH4 switch.

3

Use the TV channel selector to put the TV on the Cable Box output channel (channel 3 or 4).

4

Press the PLAY button to play the tape.

Helpful Hint

•You cannot record scrambled chan- nels with this connection.

Image 9

Contents Video Cassette Recorder VRX362AT TM For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction UseTable of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR maintenance Remove the battery compartment lid on the bottomDisconnect the antenna or cable from your TV Hookups Without a Cable BoxPlug in the TV and the VCR Hookups Without a Cable Box cont’dHookups With a Cable Box Timer RecordingsRecording/Viewing Any Channel Watching TV With the VCR OffHookups With a Cable Box cont’d Connect a Cable signal to the VCR’s ANTenna in JackRecording One Channel/Watching Another Playing a TapeHookups With a Stereo TV Turning on Your VCR Guage1Turn on the TV Channel Memory Press the Number 3 button to select Tuner SET UPProgramming Channels Press the VCR buttonAdding/Deleting Channels Reviewing Programmed ChannelsUse the Number buttons to enter the channel number Manual Clock Setting Setting the ClockPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual ClockEnter a 0 before a single digit number Question mark ? to appear on-screenCorrect number Automatic Clock Setting Setting the Clock cont’dPress the VCR button, then press the Menu button to Bring up the main menu displayPress the Number 4 button to select SET Time Zone Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 4 button to select LanguageFind your 2TV codePress and release the Mute button Find the brand of your Cable Box or Satellite System on 2FindPlay Button Remote Control ButtonsRemote Control Buttons cont’d On-Screen Status Displays Press the Number 2 button to select on Screen ModeTo choose the status display mode, follow the steps below PressedVCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape PlayingRecording Press the VCR button on the remote controlPress the Stop button to stop the recording Start a recording seeWith the Tape Speed button Channels are programmedIntact and the tape is long enough to record the programs Does not appear, press the VCR/TV button onceDaily Timer RecordingRecording Menu ScreenEnter the recording’s stop time Timer Recording cont’dTimer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings Menu button Press the Number 1 button to select ProgramSee page 50 for more hints Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Press the Number 5 button to select VCR PLUS+ REF. MAP Press the VCR button, then press the Menu buttonOnce Panel of the VCR. If it does not, press the VCR/TV buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchReal Time Counter Memory Real Time Counter MemoryForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays MTS Broadcast Stereo SystemSpecifically… MonitorMTS Broadcast Stereo System cont’d Hi-Fi Stereo Sound System Press the Number 3 button to select Audio OUTPlease see additional notes Press the STATUS/EXIT button to exit Hi-Fi Stereo Sound System cont’dHelpful Hints Helpful Hints cont’d Cable Box Output Channel Channel 3 or GlossarySpecifications Renewed Index Supplied Accessories