Philips VRX362AT warranty Panel of the VCR. If it does not, press the VCR/TV button, Once

Page 38

38 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:

● Channels are programmed (page 12).

● The VCR Plus+ and Cable/TV channel numbers are entered

(pages 36-37).

● The clock is set (pages 14-17).

● There is a tape in the VCR. Make sure the tape’s record tab is

intact and the tape is long enough to record the program(s).

4

1

		VCR	TV	CABLE
	POWER			/DSS

● The VCR power is on and the VCR light appears on the display

panel of the VCR. If it does not, press the VCR/TV button

once.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.

1

2

1 2 3

4 5 6

7 8 9

VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE

VCR/TV

CHANNEL	3
CHANNEL
VOLUME

Press the VCR button.

2

Press the VCR PLUS+ /ENTER button on the remote con- trol. The on-screen display shown below will appear.

VCR PLUS+ PROG.

PLUS CODE : – – – – – – – –

	PLAY
– REW			F.FWD +
	STOP
REC/OTR	MEMORY	SLOW	PAUSE/STILL
MENU	STATUS/EXIT	CLEAR	EJECT

TO END PUSH EXIT

3

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program, and it can be four to eight digits long). Finally, press the VCR PLUS+ /ENTER button.

VCR PLUS+ PROG.

PLUS CODE : 13285 – – –

TO SET PUSH VCR +

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

4

To record the program once, press the Number 1 button to select ONCE. To record the same program every day from Monday through Friday, press the Number 2 button to select DAILY. To record the same program every week on the same day (such as every Saturday), press the Number 3 button to select WEEKLY.

VCR PLUS+ PROG.

1ONCE

2DAILY

3WEEKLY

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

Helpful Hints

•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.

•CLASH may flash on the screen at step 3. This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out.

Image 38

Contents Video Cassette Recorder VRX362AT TM Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions UseTable of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Remove the battery compartment lid on the bottomHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Plug in the TV and the VCRRecording/Viewing Any Channel Timer RecordingsHookups With a Cable Box Watching TV With the VCR OffRecording One Channel/Watching Another Connect a Cable signal to the VCR’s ANTenna in JackHookups With a Cable Box cont’d Playing a TapeHookups With a Stereo TV 1Turn on the TV Turning on Your VCRGuage Programming Channels Press the Number 3 button to select Tuner SET UPChannel Memory Press the VCR buttonUse the Number buttons to enter the channel number Adding/Deleting ChannelsReviewing Programmed Channels Press the Number 4 button to select SET Clock Setting the ClockManual Clock Setting Press the Number 2 button to select SET Manual ClockCorrect number Enter a 0 before a single digit numberQuestion mark ? to appear on-screen Press the VCR button, then press the Menu button to Setting the Clock cont’dAutomatic Clock Setting Bring up the main menu displayTime Zone Press the Number 4 button to select SET Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 4 button to select LanguagePress and release the Mute button Find your2TV code 2Find Find the brand of your Cable Box or Satellite System onRemote Control Buttons Play ButtonRemote Control Buttons cont’d To choose the status display mode, follow the steps below Press the Number 2 button to select on Screen ModeOn-Screen Status Displays PressedVCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tapePress the VCR button on the remote control RecordingStart a recording see Press the Stop button to stop the recordingIntact and the tape is long enough to record the programs Channels are programmedWith the Tape Speed button Does not appear, press the VCR/TV button onceRecording Menu Timer RecordingDaily ScreenTimer Recording cont’d Enter the recording’s stop timeTape Speeds Timer Recording cont’dPress the STATUS/EXIT button. Program WAS COM See page 50 for more hints Checking or Cancelling Timer RecordingsMenu button Press the Number 1 button to select Program Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Press the VCR button, then press the Menu button Press the Number 5 button to select VCR PLUS+ REF. MAPPanel of the VCR. If it does not, press the VCR/TV button OnceTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchReal Time Counter Memory Real Time Counter MemorySuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Specifically… MTS Broadcast Stereo SystemUnderstanding On-Screen Displays MonitorMTS Broadcast Stereo System cont’d Please see additional notes Hi-Fi Stereo Sound SystemPress the Number 3 button to select Audio OUT Hi-Fi Stereo Sound System cont’d Press the STATUS/EXIT button to exitHelpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel Channel 3 orSpecifications Renewed Index Supplied Accessories