Philips VRA211AT owner manual Automatic Channel Setup, Press the VCR button, Press the Menu button

12 Automatic Channel Setup

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again.

1

Press the VCR button.

2

3-4

POWER VCR/TV EJECT

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

1

2

VCR

REW

MENU

TV

PLAY

F.FWD

STOP

STATUS/EXIT CLEAR

3

Press the PLAY/o button or the STOP/p button to select

1

4

7

2 3

5 6

8 9

CH

TUNER SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B

SPEED

ALT. CH

0VOL

PAUSE/STILL

→AUTO PROGRAMMING ADD/DELETE CH

CH MEMORY REVIEW

TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. The VCR distinguishes between TV channels and cable chan- nels, and the VCR will place all the channels you receive into its memory.

5

Wait for a few minutes while the VCR sets up the chan- nels. When this is complete, CHANNELS ARE SET will appear on-screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on-screen. Now when you press the CH(annel) o/p button, you will scan only through channels you receive.

REC/OTR MEMORY MUTE

Helpful Hints

•You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 00). When you select channel 00, A/V IN will appear on-screen briefly.

•You can not program channels if you are using a Cable Box or DBS.

•If you have an antenna, channels 2- 69 will be available. If you have a cable connection, channels 1-125 will be available.