Philips VRA211AT owner manual Rerecording Tape Duplication, RF coaxial cable

Page 32

32Rerecording (Tape Duplication)

1.Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2

VCR 1

Playing VCR

		VCR 2 - Recording VCR
	ANT			ANT
	IN			IN
AUDIO			AUDIO
OUT IN	OUT		OUT IN	OUT
	OUT			OUT
VIDEO	CH3 CH4		VIDEO	CH3 CH4
VIDEO			VIDEO
				3. RF coaxial cable
				from the OUT jack
		2. Video cable from VIDEO OUT Jack		of VCR 2 to the TV’s
		2. Video cable from VIDEO OUT Jack		ANTENNA IN Jack
		of VCR 1 to VIDEO IN Jack of VCR 2		ANTENNA IN Jack
		of VCR 1 to VIDEO IN Jack of VCR 2

●Audio and Video cables are not supplied.

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the VCR but- ton, then press Number buttons 0, 0 to select Line Input. A/V IN will appear on-screen.

6

Press the SPEED button to select SP or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copy guard pro- tection, it may not record clearly.

•These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.

Image 32

Contents VRA211AT Dear Philips Magnavox product owner For Customer UseThis bolt of lightning indi- cates uninsulated material Model No Serial NoIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Removing the Plastic Cover from the Front PanelHookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVCH3 CH4 Plug in the TV and the VCRCable Signal RF coaxial ConnectionsRecording/Viewing Any Channel RF coaxial Cable TV’s ANTENNAJackCable Signal Connect a Cable signal to the VCR’s ANTenna in JackRecording One Channel/Watching Another Cable Box/DBSHookups With a Stereo TV Press the VCR button, then press the Power button Turning on Your VCR2Turn on the TV Press the Menu button. The display shown below will appearPress the Menu button Automatic Channel SetupPress the VCR button Automatic Channel Setup cont’d Adding/Deleting ChannelsPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsPress the VCR button Press the Menu button Setting the Clock Enter a 0 before a single-digit numberDaylight-Savings Time Language Selection Remote Control Buttons Remote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingRead and follow the steps below to play a tape Recording Insert a tape with its record tab intact in the VCRIf the VCR light appears on the display panel, go to . If VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another VCR light will disappear from the VCR’s display panelOne-Touch Recording Timer Recording Do each step within 60 seconds of the previous stepPress the VCR button, then press the Menu button Daily Timer Recording cont’d Tape Speeds Timer Recording cont’dPress the STATUS/EXIT button. Program WAS COM Program REVIEW, then press the F.FWD/B button Checking or Cancelling Timer RecordingsTimer recording information for the program in the lowest Rerecording Tape Duplication RF coaxial cableRepeat Play Press the F.FWD/B button so that on appears besideWhile the status display is on-screen, press the Clear Button to reset the real-time counter to zeroReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Glossary Cable Box/DBS Output Channel 03 orHelpful Hints Helpful Hints cont’d Specifications Limited Warranty Model # Serial #Index Page Supplied Accessories