Philips VRA211AT Real-Time Counter Memory, While the status display is on-screen, press the Clear

34 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Press the VCR button.

2

Play, fast forward, or rewind a tape to the location that		1
you would like to refer to later. Press the STOP/p button
to stop the tape.		2
3
		3
Press the STATUS/EXIT button to see the status display.
STOP	1:08PM
	CH10
SLP	1 : 23 : 45
4		5
While the status display is on-screen, press the CLEAR
button to reset the real-time counter to zero.
STOP	1:08 PM
	CH10
SLP	0 : 00 : 00
5

While the real-time counter is on-screen, press the MEM- ORY button so that M appears beside the counter.

STOP	1:08 PM
	CH10

POWER VCR/TV EJECT

VCR TV

	PLAY
REW		F.FWD
	STOP
MENU	STATUS/EXIT	CLEAR

1	2	3
4	5	6	CH
7	8	9
		ALT. CH

0VOL

SPEEDPAUSE/STILL

REC/OTR MEMORY MUTE

6

4

SLP M 0 : 00 : 00

6

To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/{ button or the F.FWD/B button when playback is stopped.

When the tape reaches the point at which the counter was set to zero, the tape will stop.

Press the PLAY/o button to watch the tape.

Helpful Hints

•The MEMORY button does not function if REPEAT PLAY is set to ON. Details are on page 33.

•To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen.

•You may only set the real-time counter to zero at one location at a time. If you set the real-time counter to zero at a second loca- tion, the previous real-time counter to zero setting will be erased.