Philips VRA211AT Timer Recording, Do each step within 60 seconds of the previous step, Daily

28 Timer Recording

Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin:

●Set up the channels at the VCR.

●Set the clock.

●Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

●Put the VCR in VCR position. The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

1

2-3

	POWER	VCR/TV	EJECT
1	VCR	TV
		PLAY
	REW		F.FWD
		STOP
	MENU	STATUS/EXIT	CLEAR

Press the VCR button, then press the MENU button.

SELECT op CHOOSE B

1 2 3

4 5 6

7 8 9

CH

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

2

Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B button.

SELECT op CHOOSE B

→ONCE DAILY WEEKLY PROGRAM REVIEW

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, or WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

Daily	DAILY PROGRAM (MON-FRI)
	PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PUSH EXIT

ALT. CH

0VOL

SPEEDPAUSE/STILL

REC/OTR MEMORY MUTE

Helpful Hint

•If you need to make a correction while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the

correct information.