Cisco Systems PIX515E quick start

Page 13

Note Enter the entire network range (10.10.10.0) or select the network using the Browse button and select the Pool ID if there are multiple HTTP clients.

Image 13

Contents Cisco PIX 515E Firewall Software Features Hardware FeaturesAbout the Cisco PIX 515E Firewall Check Items Included 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feetDMZ Install the PIX 515EConfigure the PIX 515E DMZ Configuration Example ConfigurationsManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Establishing Site-to-Site VPNs with other Cisco Products Optional Maintenance and Upgrade ProceduresObtaining DES and 3DES/AES Encryption Licenses Command Description Restore the Default ConfigurationHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet LED Check the LEDsColor Status Description Cisco.com Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco TAC Website TAC Case Priority Definitions Opening a TAC CaseObtaining Additional Publications and Information Page USA