Cisco Systems PIX515E quick start

Page 18

The Edit Rule window opens up, allowing you to select the ACL rules to permit/deny traffic.

a.Under Action, select permit from the drop-down menu to allow traffic through the firewall.

b.Under Source Host/Network, click the IP Address radio button.

c.Select outside from the Interface drop-down menu.

18

Image 18

Contents Cisco PIX 515E Firewall Hardware Features Software FeaturesAbout the Cisco PIX 515E Firewall 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feet Check Items IncludedInstall the PIX 515E DMZConfigure the PIX 515E Example Configurations DMZ ConfigurationManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Optional Maintenance and Upgrade Procedures Establishing Site-to-Site VPNs with other Cisco ProductsObtaining DES and 3DES/AES Encryption Licenses Restore the Default Configuration Command DescriptionHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet Check the LEDs LEDColor Status Description Documentation CD-ROM Obtaining DocumentationCisco.com Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco TAC Website Opening a TAC Case TAC Case Priority DefinitionsObtaining Additional Publications and Information Page USA