Cisco Systems PIX515E quick start Configure the VPN Peer

Page 22

Step 2 Configure the VPN Peer

a.Enter the Peer IP Address (PIX 2) and select an authentication key (for example,“CisCo”), which is shared for IPSec negotiations between both PIX 515E units.

Note To configure PIX 2, enter the IP address for PIX 1 (1.1.1.1) and the same Pre-shared Key (CisCo).

b.To use X.509 certificates for authentication, check the Certificate radio button and the applicable option for the peer identity, FQDN (Fully Qualified Domain Name) or IP Address. If the peer identity is its FQDN, enter the exact name in the text field.

c.Click the Next button to continue.

22

Image 22

Contents Cisco PIX 515E Firewall Software Features Hardware FeaturesAbout the Cisco PIX 515E Firewall 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feet Check Items IncludedInstall the PIX 515E DMZConfigure the PIX 515E Example Configurations DMZ ConfigurationManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Establishing Site-to-Site VPNs with other Cisco Products Optional Maintenance and Upgrade ProceduresObtaining DES and 3DES/AES Encryption Licenses Restore the Default Configuration Command DescriptionHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet Check the LEDs LEDColor Status Description Documentation CD-ROM Obtaining DocumentationCisco.com Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco TAC Website Opening a TAC Case TAC Case Priority DefinitionsObtaining Additional Publications and Information Page USA