Cisco Systems PIX515E quick start

Page 25

2.Configure the IPSec parameters.

a.In the second window, select the Encryption algorithm (DES/3DES/AES) and Authentication algorithm (MD5/SHA). Confirm all values before continuing to the next window.

Note When configuring PIX 2, enter the exact same values for each of the options that you selected for PIX 1. Encryption and algorithm mismatches are a common cause of VPN tunnel failures and can slow down the process.

b.Click the Next button to continue.

Image 25

Contents Cisco PIX 515E Firewall Software Features Hardware FeaturesAbout the Cisco PIX 515E Firewall Check Items Included 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feetDMZ Install the PIX 515EConfigure the PIX 515E DMZ Configuration Example ConfigurationsManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Establishing Site-to-Site VPNs with other Cisco Products Optional Maintenance and Upgrade ProceduresObtaining DES and 3DES/AES Encryption Licenses Command Description Restore the Default ConfigurationHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet LED Check the LEDsColor Status Description Cisco.com Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco TAC Website TAC Case Priority Definitions Opening a TAC CaseObtaining Additional Publications and Information Page USA