Cisco Systems PIX515E quick start

Page 27

2.Select traffic permitted from the remote PIX Firewall.

a.In the second window, select VPN traffic for remote network configuration. For PIX 1, the remote network is Network B (20.20.20.0) so traffic encrypted from this tunnel is permitted through the tunnel.

Note When configuring PIX 2, ensure that the values are correctly entered. The remote network for PIX 1 is the local network for PIX 2 and vice versa.

b.Click the Finish button to complete the configuration.

Image 27

Contents Cisco PIX 515E Firewall Hardware Features Software FeaturesAbout the Cisco PIX 515E Firewall Check Items Included 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feetDMZ Install the PIX 515EConfigure the PIX 515E DMZ Configuration Example ConfigurationsManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Optional Maintenance and Upgrade Procedures Establishing Site-to-Site VPNs with other Cisco ProductsObtaining DES and 3DES/AES Encryption Licenses Command Description Restore the Default ConfigurationHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet LED Check the LEDsColor Status Description Ordering Documentation Obtaining DocumentationCisco.com Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceCisco TAC Website TAC Case Priority Definitions Opening a TAC CaseObtaining Additional Publications and Information Page USA