Cisco Systems PIX515E quick start View and Enable VPN Commands

Page 28

Step 5 View and Enable VPN Commands

If you enabled preview commands, you will see this page:

To enable preview commands:

a.In the main PDM page, select Options.

b.Select Preferences and check the Preview commands before sending to firewall box.

Check the configuration to ensure that all values are entered correctly. Click the Send button to enable PIX 1 for site-to-site VPN communication with PIX 2.

This concludes configuration for PIX 1. When configuring PIX 2, enter the exact same values for each of the options that you selected for PIX 1. Mismatches are a common cause of VPN configuration failures.

28

Image 28

Contents Cisco PIX 515E Firewall Software Features Hardware FeaturesAbout the Cisco PIX 515E Firewall 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feet Check Items IncludedInstall the PIX 515E DMZConfigure the PIX 515E Example Configurations DMZ ConfigurationManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Establishing Site-to-Site VPNs with other Cisco Products Optional Maintenance and Upgrade ProceduresObtaining DES and 3DES/AES Encryption Licenses Restore the Default Configuration Command DescriptionHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet Check the LEDs LEDColor Status Description Obtaining Documentation Cisco.comDocumentation CD-ROM Ordering DocumentationObtaining Technical Assistance Documentation FeedbackCisco TAC Website Opening a TAC Case TAC Case Priority DefinitionsObtaining Additional Publications and Information Page USA