Cisco Systems PIX515E quick start Provide Http Access to the DMZ Web Server

Page 17

Step 4 Provide HTTP Access to the DMZ Web Server

In addition to configuring address translations, you must configure the PIX 515E to allow the specific traffic types from the public networks. To configure access lists for HTTP traffic originating from any client on the Internet to the DMZ web server, complete the following:

a.Click the Configuration button at the top of the PDM window.

b.Select the Access rules tab.

c.In the table, right click and select Add.

17

Image 17

Contents Cisco PIX 515E Firewall About the Cisco PIX 515E Firewall Hardware FeaturesSoftware Features Check Items Included 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feetDMZ Install the PIX 515EConfigure the PIX 515E DMZ Configuration Example ConfigurationsManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Obtaining DES and 3DES/AES Encryption Licenses Optional Maintenance and Upgrade ProceduresEstablishing Site-to-Site VPNs with other Cisco Products Command Description Restore the Default ConfigurationHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet LED Check the LEDsColor Status Description Cisco.com Obtaining DocumentationDocumentation CD-ROM Ordering DocumentationCisco TAC Website Documentation FeedbackObtaining Technical Assistance TAC Case Priority Definitions Opening a TAC CaseObtaining Additional Publications and Information Page USA