Cisco Systems PIX515E quick start Start the VPN Wizard

PDM provides an easy-to-use VPN Wizard that can quickly guide you through the process of configuring a site-to-site VPN in five simple steps. The illustration below shows an example VPN tunnel between two PIX 515E, and will be referenced in the following steps.

Site A Site B

	PIX 1			PIX 2
Inside	Outside	Internet	Outside	Inside	98000
10.10.10.0	1.1.1.1		2.2.2.2	20.20.20.0

Step 1 Start the VPN Wizard

Use PDM to configure PIX 1. In the main PDM page, select the VPN Wizard option from the Wizards drop-down menu. This opens the VPN Wizard page.

At the first VPN Wizard page, do the following:

a.Select the Site to Site VPN option.

Note The Site to Site VPN option connects two IPSec security gateways, which can include PIX Firewalls, VPN concentrators, or other devices that support site-to-site IPSec connectivity.

b.Select outside from the drop-down menu as the enabled interface for the current VPN tunnel.

c.Click the Next button to continue.

21