Cisco Systems PIX515E quick start

Page 14

j.Click the OK button.

k.Click the Proceed button. Check the displayed configuration for accuracy.

l.Click the Apply button to configure the PIX Firewall.

Repeat the steps to configure interface PAT between the inside and outside interfaces. The procedure remains the same, except the interface on which the translation is required is now the outside interface and the Dynamic address pool should now indicate the interface PAT keywords.

The configurations should display as shown below:

Image 14

Contents Cisco PIX 515E Firewall About the Cisco PIX 515E Firewall Hardware FeaturesSoftware Features 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feet Check Items IncludedInstall the PIX 515E DMZConfigure the PIX 515E Example Configurations DMZ ConfigurationManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Obtaining DES and 3DES/AES Encryption Licenses Optional Maintenance and Upgrade ProceduresEstablishing Site-to-Site VPNs with other Cisco Products Restore the Default Configuration Command DescriptionHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet Check the LEDs LEDColor Status Description Documentation CD-ROM Obtaining DocumentationCisco.com Ordering DocumentationCisco TAC Website Documentation FeedbackObtaining Technical Assistance Opening a TAC Case TAC Case Priority DefinitionsObtaining Additional Publications and Information Page USA