Cisco Systems PIX515E quick start Configure Internal Traffic

Page 26

Step 4 Configure Internal Traffic

This step is comprised of two windows:

1.Select network traffic on the local PIX 515E encrypted through the VPN tunnel. a. Select the Local Host/Network based on the IP Address, Name, or Group.

Note Use the Browse button to select from preconfigured groups.

Add or remove networks dynamically from the selected panel by clicking on the >> or << buttons respectively. Traffic from Network A (10.10.10.0) is encrypted by PIX 1 and transmitted through the VPN tunnel.

b.Click the Next button to continue.

26

Image 26

Contents Cisco PIX 515E Firewall About the Cisco PIX 515E Firewall Hardware FeaturesSoftware Features 69-0123-01 69-0124-01 69-0125-01 Power cable Rubber feet Check Items IncludedInstall the PIX 515E DMZConfigure the PIX 515E Example Configurations DMZ ConfigurationManage IP Pools for Network Translations Select the Translation Rules tab Page Page Configure Address Translations on Private Networks Page Page Page Configure External Identity for the DMZ Web Server Configurations should display as shown below Provide Http Access to the DMZ Web Server Page Page Site-to-Site VPN Configuration Start the VPN Wizard Configure the VPN Peer Page Configure the IKE Policy Page Configure Internal Traffic Page View and Enable VPN Commands Obtaining DES and 3DES/AES Encryption Licenses Optional Maintenance and Upgrade ProceduresEstablishing Site-to-Site VPNs with other Cisco Products Restore the Default Configuration Command DescriptionHttp 192.168.1.0 Alternative Ways to Access the PIX 515E Ethernet Check the LEDs LEDColor Status Description Documentation CD-ROM Obtaining DocumentationCisco.com Ordering DocumentationCisco TAC Website Documentation FeedbackObtaining Technical Assistance Opening a TAC Case TAC Case Priority DefinitionsObtaining Additional Publications and Information Page USA