Table 2-5 lists all available network connectivity.
)$!1
25 .25
Built-in 10/100Base-T Ethernet
Additional 10/100Base-T Ethernet
GB (1000Base-T) Ethernet
'8"#
The filer supports three types of Ethernet NICs: a single-port 10/100Base-T, a quad- port 10/100Base-T, and a GB Ethernet.
! #,+
Table 2-6 lists the cabling requirements for Ethernet connections.
,#45-
-4 | /0 |
| |
10Base-T | Category 3 or 5 unshielded twisted- |
| pair (UTP) cable.* |
100Base-TX | Category 5 UTP cable.* |
GB Ethernet | Fiber cable. |
*Do not exceed the maximum cable length specification.
0.1&21&&!.
To connect the filer to a 10/100Base-T Ethernet network, perform the following step:
1.Push the twisted-pair cable connector into the filer’s built-in RJ-45 connector, labeled 10/100Base-T, until it clicks and locks into place.
Use Category 3 (10Base-T only) or Category 5 (10/100Base-T) unshielded twisted- pair (UTP) cable.
Figure 2-11 shows the built-in Ethernet connector.
2-16 Dell PowerVault 720N, 740N, and 760N Installation and Troubleshooting Guide
