Dell 720N, 740N, 760N manual Filer’s /etc/passwd and /etc/group

I

￿￿￿￿￿￿￿￿￿/￿￿￿%￿￿￿￿-￿￿￿￿￿￿￿￿￿￿￿#￿￿￿￿￿:￿￿￿￿￿￿￿￿

-￿￿￿￿￿￿￿￿￿￿￿￿￿	$￿￿￿￿￿￿￿￿￿￿
CIFS service disabled!	This message appears only if you have
	licensed CIFS. One of the following errors
	causes CIFS service to fail:
	￿ The filer’s /etc/passwd and /etc/group
	files are missing. To learn how to cre-
	ate a new filer, refer to the Dell
	PowerVault 720N, 740N, and 760N
	System Administrator and Command
	Reference Guide.
	￿ The filer failed to register its WINS
	host name and workgroup name with
	the WINS server. Using the cifs
	setup command, enter the host
	name and workgroup name.
	￿ The WINS server has a problem.
	Refer to the documentation for your
	WINS server for information about
	troubleshooting the server.
Data disk n x% rebuilt	n—The RAID group disk number; x—
	amount of data reconstruction completed.
	This shows how much data reconstruction
	has been completed on the spare disk
	after the system entered degraded mode.
	If an error occurs when the reconstruction
	is in progress, the error message over-
	rides this message.
	Refer to the Dell PowerVault 720N, 740N,
	and 760N System Administrator and
	Command Reference Guide for informa-
	tion about how to locate a disk based on
	the RAID group disk number.
Disk n is broken	n—The RAID group disk number. The
	solution depends on whether you have a
	hot spare installed in the system. Refer to
	the Dell PowerVault 720N, 740N, and 760N
	System Administrator and
	Command Reference Guide for informa-
	tion about how to locate a disk based on
	the RAID group disk number and how to
	replace a faulty disk.

Troubleshooting the Filer Hardware 3-17