The hitcharm should now protrude about 2 cm / 3/4 inch out of the rear side of the VersaWing 2.0, and the rear vertical holes in the VersaWing 2.0 and hitcharm must align with each other.
Insert the security pin into the rear vertical hole of the VersaWing 2.0 and push it down completely through the hitcharm until the retaining ring is touching the top of the VersaWing 2.0.
Correctly installed hitcharm.
DANGER
Make sure that the hitcharm is correctly attached and se- cured to the carrier. Any kind of incorrect assembly may lead to loss of the carrier during travel, with serious consequences for your child, possibly even fatal injuries.
Attaching the hitcharm to the bicycle (Chariot
Your specialist dealer fi ts the Chariot
In certain special cases, however, you may have to fi t it yourself, e.g. after removing the rear wheel or when fi tting the
In all cases, we recommend that you have the
DANGER
The security pin must always be inserted, in addition to the large spring button in the bicycle hitcharm! A hitcharm that has not been secured properly may come loose during travel, with serious consequences for your child, possibly even fatal injuries.
28