Chariot Carriers CX 2 Fixing the Weber hitch to the bicycle, Special features of the VersaWing

DANGER

Always attach the hitch’s back-up safety strap in the manner described above. It serves as additional protection against losing the carrier during operation.

DANGER

Do not use the Bicycle Trailer if you cannot attach the hitch’s back-up safety strap around your bicycle frame for any reason! Contact your specialist retailer for assistance if this occurs.

Fixing the Weber hitch to the bicycle

In this connection, please read carefully the comprehensive manufacturer’s instructions which are supplied by Weber both for the hitch with adjustable kickstand (Weber B) and for the Weber Axle-Mount Hitch (Weber E).

Special features of the VersaWing 2.0

If you want to convert the carrier from a Bicycle Trailer to another CTS Conversion Kit, or if you want to store the carrier, the hitcharm on the Cougar and CX can be stored to the side of the carrier.

For this the carrier must not be folded.

Insert the front end of the hitcharm in the groove provided for it in the Click ‘n’ Store bracket located on the rear side of the carrier. The rear end of the hitcharm will point forward. Push the hitcharm in the Click ‘n’ Store bracket down until the end of the hitcharm catches in the recess of the VersaWing 2.0, and the horizontal holes of the hitcharm and VersaWing 2.0 are aligned with each other.

Weber B

Weber E

TIP

Always store the hitcharm on the left-hand side of the carrier (as seen in the direction of travel).

Use the security pin at the end of the hitcharm for attaching the hitcharm to the VersaWing 2.0. For this, insert the pin through the horizontal hole in the VersaWing 2.0 and hitcharm until it will go no further.

DANGER

Always secure the stored hitcharm to the VersaWing 2.0. If you do not do this, it could work loose, get caught in the wheel spokes and cause an accident.

31