Weight distribution
DANGER
So as to prevent it from tipping backwards, the storage bags at the rear of the carrier may not be loaded with excessive weight. Carry out the following check: Push downwards on the handlebar by about 150 mm. The carrier should return to its original standing position and should not tip backwards. Manufacturer’s recommendation: There should be a maxi- mum load of 4 kg in all the rear storage bags together if no handlebar bag is being used.
The maximum load of the handlebar bag is 1 kg. The maxi- mum load of the other rear storage bags is reduced to 2 kg if the handlebar bag is loaded with 1 kg.
7. The Strolling Kit
The assembled Stroller (CTS Ready Chassis + Strolling Kit)
Supplied as standard
Strolling Kit:
2 x 8” stroller wheels
Safety instructions for use as a Stroller
•Please make sure you read the safety instructions in the “Safety” section at the beginning of this Owner’s Manual.
•Before each journey check that all components are properly fi tted, particularly the stroller casters and the handlebar.
•Do not park the carrier on roads or other places which are on an incline.
•If you leave the stroller stationary, always secure it with the parking brake.
•When pushing the stroller, always put the wrist safety strap around your wrist.
•Inline skating with the stroller is not permitted.
•The foot activated parking brake on the Cheetah 1, Cheetah 2, Cougar 1 and Cougar 2 models is not suitable for deceleration of a moving carrier.
•So as to prevent it from tipping backwards, the storage bags at the rear of the carrier may not be loaded with excessive weight. Carry out the following check: Depress the handlebar by about 15 cm. The carrier should return to its original standing position and should not tip backwards. Manufacturer’s recommendation: Maximum load in the storage bags together if no handlebar bag is being used. The maximum load of the handlebar bag is 1 kg. The maximum load of the other storage bags is reduced to 2 kg if the handlebar bag is loaded with 1 kg.
38