Guide the quick-release axle through the wheel axle and screw on the nut. Both skewer springs must be located on each side so that the narrow side points towards the centre of the hub.
Tip the carrier backwards and put it down on the handlebar. Insert the wheel in the axle dropouts.
Close the quick- release lever.
In order to ensure that the hub is clamped suffi ciently in the axle dropouts, the quick-release lever must begin gripping as it moves from the open to the middle position, and approaching the closed position you should clearly feel resistance as you tighten.
If it is too easy or too diffi cult to move the quick-release, tighten or loosen the lock nut on the other side of the hub to adjust.
If you don’t feel confident operating the quick-release skewer, please ask your specialist retailer for assistance.
DANGER
Always make sure that the quick-release is correctly instal- led. An incorrectly tensioned quick-release may lead to the rear wheel coming loose, resulting in accidents.
DANGER
When using the carrier as a Jogging Stroller, always put the safety wrist strap, which is fastened securely on the left rear upper frame tube, around your wrist. This prevents the carrier from accidentally rolling away.
