If you want to convert the carrier from Stroller to another CTS Conversion Kit, you can store the stroller wheels on the top of the VersaWing 2.0 .
To attach them proceed as described above.
The caster fork arms should point backwards.
DANGER
Always make sure that the stroller wheels are fully engaged and locked.
DANGER
When used as a Bicycle Trailer, the stroller wheels must never be installed in their use position (wheels down). They may only be carried in their
Weight distribution
DANGER
So as to prevent it from tipping backwards, the storage bags at the rear of the carrier may not be loaded with excessive weight. Carry out the following check: Push downwards on the handlebar by about 150 mm. The carrier should return to its original standing position and should not tip backwards. Manufacturer’s recommendation: There should be a maxi- mum load of 4 kg in all the rear storage bags together if no handlebar bag is being used.
The maximum load of the handlebar bag is 1 kg. The maxi- mum load of the other rear storage bags is reduced to 2 kg if the handlebar bag is loaded with 1 kg.
DANGER
When using the carrier as a Jogging Stroller, always put the safety wrist strap, which is fastened securely on the left rear upper frame tube, around your wrist. This prevents the carrier from accidentally rolling away.
Correct assembly of the stroller | Wrong!!! |
wheels for carrying them |
|
| |
Bicycle Trailer. |
|
Travelling
Always make sure you follow the Owner’s Manual for the brake system on the CX – please see Section 4.10.
DANGER
Your safety and the safety of your child in a dangerous situa- tion may depend on correct use of the brake.
40