Combi 8100 Operation and Adjustments, Harness Use and Adjustment, Changing Harness Positions

45

Section 11 - Operation and Adjustments

A.Harness Use and Adjustment

1Harness Straps Adjustment:

•To tighten: Pull harness adjuster strap (fig. a).

•To loosen: While pressing harness adjuster lever, pull harness straps (fig. b).

Harness

Adjuster

Strap

(fig. a)

Harness

Adjuster

Lever

(fig. b)

2Chest Clip Operation:

• To open: Press tabs 1 and pull		1
apart 2 (fig. c).
• To close: Snap halves together.	2	2
Make sure chest clip
is locked by pulling out.		1

(fig. c)

3 Buckle Operation:
• To buckle:
- Place top of buckle tongues together	Click
and insert buckle tongues into buckle
(fig. d).
- Pull up on tongues to be sure they	(fig. d)
are locked.

•To unbuckle:

-Press red button and pull tongues out of buckle.

B.Changing Harness Positions:

Rear-facing - Shoulder harness straps must be through slots at or just below shoulders.

-Use only middle or lowest harness strap slots for rear-facing.

Forward-facing - Shoulder harness straps must be at or above shoulders.

-Discontinue use of car seat if top shoulder harness slots are below shoulders of child.

46