Combi 8100 instruction manual Avatar Car Seat Parts, Belt Path

Page 5

7

Section 4 - Avatar™ Car Seat Parts

Infant Insert

Shoulder
Harness	Shoulder Harness
Slots
	Shoulder Harness Cover
Chest Clip	Buckle Tongues
	Buckle Tongues
	Crotch Strap
	with Buckle
	Harness
	Adjuster Lever
	Harness
	Adjuster Strap
	Recline Lever
	(Red handle under
	front of seat)

LATCH Connector
Storage Ring	Lower Anchor
	Lower Anchor
	Belt and Connector
	Rear-facing		Instruction
	Rear-facing		Manual
	Level Indicator		Manual
	Level Indicator
		Rear-facing	C MBI	Instruction Manual
		Rear-facing	Avatar™ Convertible Car Seat
		Belt Path	Ancho	and use can be a matter
			AT CH	WARNING
	Recline		ner	WARNING
			r	Correct installation
				using this car seat.
			rs and	of Life or Death! Read
				and understand these
	Indicator			instructions before
	Indicator			• Meets or exceeds all
				• Certified for use in motor
				vehicles and aircraft.
				applicable requirements
				of Federal Motor Vehicle
				Safety Standard 213.
			Avatar™ 8100 Series	Para instrucciones en Español,
			Avatar™ 8100 Series	llamar al: 1-800-992-6624.

	Top
Upper	Tether
Base	Strap

Top

Tether

Hook

Lower	Forward-facing	Use Position
Base	Forward-facing	Use Position
	Belt Path	Indicator

Use Position

IndicatorInstruction Manual

Storage Pocket

Metal Harness

Strap Clip

Adjuster

Strap

Loop

8

Image 5

Contents Avatar Convertible Car Seat Table of Contents Proper Use Is Required Proper Use Check List Need help installing your infant car seat?Belt Path Avatar Car Seat PartsRear-facing Use 5 to 30 lbs .3 to 13.6 kg Use RecommendationsForward-facing Use 20 to 40 lbs to 18 kg Selecting a Vehicle Seating LocationTop Tether Information Options For Securing a Car SeatLatch System On This Car Seat Latch SystemSecuring Car Seat To Vehicle Latch System In VehiclesRear-facing For Use 5 to 30 Pounds 2.3 to 13.6 kg Rear-facing InstallationRear-facing Installation With Latch Remove the lower anchor connectors Fig. h Storage Of Lower Anchor Belt And Connectors Removal Of Car Seat Installed With LatchFig. a Rear-facing Belt Path Rear-facing Installation With Vehicle Seat BeltFig. e Removal Of Car Seat Installed With Vehicle Seat BeltForward-facing For Use 20 to 40 Pounds 9 to 18 kg Forward-facing InstallationForward-facing Installation With Latch Seat back and centered between Vehicle lower anchors fig. d Fig. g Pull to tighten Storage Of Lower Anchor Belt And Connectors Forward-facing Installation With Vehicle Seat BeltFig. b Fig. j Securing Child In Car Seat Click Changing Harness Positions Operation and AdjustmentsHarness Use and Adjustment To Re-secure Shoulder Harness Straps To change harness strap slotsInfant Insert Changing Crotch Strap PositionChanging Forward-Facing/Rear-Facing Use Position Recline Position AdjustmentTo change recline position To change use positionLatch Changing Belt Path Location To provide a secure installation of the car seatVehicle Seat Belts Flip Belts Forward of Seat BightLap or Shoulder Belt Mounted on Front Door fig. f Removing Harness Covers, Seat Pad and Infant Insert Care and CleaningAdditional Information Cleaning Shell Cleaning Harness StrapsCleaning Buckle Registration InformationAvatar Convertible Car Seat