Combi 8100 instruction manual Latch System On This Car Seat, Securing Car Seat To Vehicle

Page 9

15

Section 7 - LATCH System

LATCH System On This Car Seat:

The LATCH System on the Avatar Car Seat consists of a lower anchor belt 1 with lower anchor connectors

2and for forward-facing use, a top tether strap with tether hook 3 (fig. a).

Rear-facing car seat installation typically uses only the lower anchor belt 1 with lower anchor connectors 2 (fig. b), no top tether.

3

21

(fig. a)

Securing Car Seat To Vehicle:

The lower anchor connectors 2 and top tether hook 3 on the car seat connect to the LATCH System in a vehicle.

LATCH System In Vehicles:

Child restraint anchorage system or LATCH System in the vehicle consists of two lower anchors 4 located at the vehicle seat bight 5 and a top tether anchor 6 (fig. c). Refer to vehicle owner’s manual for seating locations which have the LATCH System.

Lower anchors are visible in some vehicles and others are not. Those that are not visible are identified by a solid color round dot on the vehicle upholstery or a round dot with a picture of a car seat in the center as shown in fig. d.

21

(fig. b)

6

4

5

(fig. c)

(fig. d)

The vehicle manufacturer may provide funnel guides to separate the vehicle seat cushions providing easier access to the lower anchorage. See vehicle owner’s manual.

16

Image 9
Contents Avatar Convertible Car Seat Table of Contents Proper Use Is Required Proper Use Check List Need help installing your infant car seat?Belt Path Avatar Car Seat PartsRear-facing Use 5 to 30 lbs .3 to 13.6 kg Use RecommendationsForward-facing Use 20 to 40 lbs to 18 kg Selecting a Vehicle Seating LocationTop Tether Information Options For Securing a Car SeatLatch System On This Car Seat Latch SystemSecuring Car Seat To Vehicle Latch System In VehiclesRear-facing Installation Rear-facing Installation With LatchRear-facing For Use 5 to 30 Pounds 2.3 to 13.6 kg Remove the lower anchor connectors Fig. h Storage Of Lower Anchor Belt And Connectors Removal Of Car Seat Installed With LatchFig. a Rear-facing Belt Path Rear-facing Installation With Vehicle Seat BeltFig. e Removal Of Car Seat Installed With Vehicle Seat BeltForward-facing Installation Forward-facing Installation With LatchForward-facing For Use 20 to 40 Pounds 9 to 18 kg Seat back and centered between Vehicle lower anchors fig. d Fig. g Pull to tighten Storage Of Lower Anchor Belt And Connectors Forward-facing Installation With Vehicle Seat BeltFig. b Fig. j Securing Child In Car Seat Click Operation and Adjustments Harness Use and AdjustmentChanging Harness Positions To Re-secure Shoulder Harness Straps To change harness strap slotsInfant Insert Changing Crotch Strap PositionChanging Forward-Facing/Rear-Facing Use Position Recline Position AdjustmentTo change recline position To change use positionTo provide a secure installation of the car seat Vehicle Seat BeltsLatch Changing Belt Path Location Flip Belts Forward of Seat BightLap or Shoulder Belt Mounted on Front Door fig. f Care and Cleaning Additional InformationRemoving Harness Covers, Seat Pad and Infant Insert Cleaning Shell Cleaning Harness StrapsCleaning Buckle Registration InformationAvatar Convertible Car Seat