Combi 8100 instruction manual Additional Information, Care and Cleaning

Page 31

59

Section 13 - Additional Information

Certification

This car seat meets or exceeds all applicable requirements of Federal Motor Vehicle Safety Standard 213 for use in motor vehicles and aircraft.

Aircraft Use

This car seat is certified for use on aircraft (see label on car seat). Contact airline about their policy.

Use this car seat only on forward-facing aircraft seats.

Install car seat on aircraft the same way it is installed in a vehicle.

Warm Weather

Car seat parts can get very hot in the sun or warm weather.

To avoid burns, always check before putting child in car seat.

Vehicle Seat Protection

Protect vehicle seat. Use a thin car seat mat, thin towel or thin blanket under and behind car seat.

Car Seat Useful Life

DO NOT use after 7 years from date of manufacture on label.

Instruction Manual Storage

Store instruction manual inside pocket on back of car seat.

Section 14 - Care and Cleaning

Removing Harness Covers, Seat Pad and Infant Insert:

-Remove harness strap metal clips from the adjuster strap loop, see “Operations and Adjustments” section.

-Pull harness straps through slots in car seat shell and seat pad.

-Slide shoulder harness covers off end of shoulder belt over metal harness strap clips.

-Remove infant insert from car seat by lifting insert out of car seat pad.

-Slide seat pad from car seat by gently pulling it off the top of car seat back.

Reverse above steps for replacing seat pad and harness system.

60

Image 31
Contents Avatar Convertible Car Seat Table of Contents Proper Use Is Required Proper Use Check List Need help installing your infant car seat?Belt Path Avatar Car Seat PartsRear-facing Use 5 to 30 lbs .3 to 13.6 kg Use RecommendationsForward-facing Use 20 to 40 lbs to 18 kg Selecting a Vehicle Seating LocationTop Tether Information Options For Securing a Car SeatLatch System In Vehicles Latch SystemLatch System On This Car Seat Securing Car Seat To VehicleRear-facing Installation With Latch Rear-facing InstallationRear-facing For Use 5 to 30 Pounds 2.3 to 13.6 kg Remove the lower anchor connectors Fig. h Storage Of Lower Anchor Belt And Connectors Removal Of Car Seat Installed With LatchFig. a Rear-facing Belt Path Rear-facing Installation With Vehicle Seat BeltFig. e Removal Of Car Seat Installed With Vehicle Seat BeltForward-facing Installation With Latch Forward-facing InstallationForward-facing For Use 20 to 40 Pounds 9 to 18 kg Seat back and centered between Vehicle lower anchors fig. d Fig. g Pull to tighten Storage Of Lower Anchor Belt And Connectors Forward-facing Installation With Vehicle Seat BeltFig. b Fig. j Securing Child In Car Seat Click Harness Use and Adjustment Operation and AdjustmentsChanging Harness Positions To Re-secure Shoulder Harness Straps To change harness strap slotsInfant Insert Changing Crotch Strap PositionTo change use position Recline Position AdjustmentChanging Forward-Facing/Rear-Facing Use Position To change recline positionVehicle Seat Belts To provide a secure installation of the car seatLatch Changing Belt Path Location Flip Belts Forward of Seat BightLap or Shoulder Belt Mounted on Front Door fig. f Additional Information Care and CleaningRemoving Harness Covers, Seat Pad and Infant Insert Registration Information Cleaning Harness StrapsCleaning Shell Cleaning BuckleAvatar Convertible Car Seat