Combi 8100 instruction manual Changing Crotch Strap Position, Infant Insert

Page 26

49

C.Changing Crotch Strap Position:

Rear-facing:

Crotch strap MUST be in position closest to but not under child for rear-facing position.

Forward-facing:

Front position MUST always be used for forward-facing position.

To Position Crotch Strap Closer To Child:

1.Remove seat pad from front of car seat.

2.For rear-facing use, if crotch strap is

too far away from child, slide crotch strap under crotch strap anchor tabs (fig. i).

3. Replace seat pad over front of car seat.

To Move Crotch Strap Away From Child:

1.Remove seat pad from front of car seat.

2.Slide crotch strap out from under crotch strap anchor tabs.

3.Replace seat pad over front of car seat.

Crotch Strap

(fig. i)

 

Anchor Tab

 

D.Infant Insert:

WARNING

DEATH or SERIOUS INJURY can occur

• To prevent ejection:

Shoulder belts MUST be through belt slots in infant insert.

-For proper harness fit, infant insert MUST be used for small infants.

Discontinue use of infant insert when:

-Child’s shoulders are above middle belt slots in seat back of car seat.

-Shoulder belts become too short to fit infant (approximately 5 months of age).

50

Image 26
Contents Avatar Convertible Car Seat Table of Contents Proper Use Is Required Need help installing your infant car seat? Proper Use Check ListAvatar Car Seat Parts Belt PathUse Recommendations Rear-facing Use 5 to 30 lbs .3 to 13.6 kgSelecting a Vehicle Seating Location Forward-facing Use 20 to 40 lbs to 18 kgOptions For Securing a Car Seat Top Tether InformationSecuring Car Seat To Vehicle Latch SystemLatch System On This Car Seat Latch System In VehiclesRear-facing For Use 5 to 30 Pounds 2.3 to 13.6 kg Rear-facing InstallationRear-facing Installation With Latch Remove the lower anchor connectors Fig. h Removal Of Car Seat Installed With Latch Storage Of Lower Anchor Belt And ConnectorsRear-facing Installation With Vehicle Seat Belt Fig. a Rear-facing Belt PathRemoval Of Car Seat Installed With Vehicle Seat Belt Fig. eForward-facing For Use 20 to 40 Pounds 9 to 18 kg Forward-facing InstallationForward-facing Installation With Latch Seat back and centered between Vehicle lower anchors fig. d Fig. g Pull to tighten Forward-facing Installation With Vehicle Seat Belt Storage Of Lower Anchor Belt And ConnectorsFig. b Fig. j Securing Child In Car Seat Click Changing Harness Positions Operation and AdjustmentsHarness Use and Adjustment To change harness strap slots To Re-secure Shoulder Harness StrapsChanging Crotch Strap Position Infant InsertTo change recline position Recline Position AdjustmentChanging Forward-Facing/Rear-Facing Use Position To change use positionLatch Changing Belt Path Location To provide a secure installation of the car seatVehicle Seat Belts Belts Forward of Seat Bight FlipLap or Shoulder Belt Mounted on Front Door fig. f Removing Harness Covers, Seat Pad and Infant Insert Care and CleaningAdditional Information Cleaning Buckle Cleaning Harness StrapsCleaning Shell Registration InformationAvatar Convertible Car Seat