Recline Position Adjustment, To change use position

E.Recline Position Adjustment:

To change recline position:

•Lift and hold recline lever under front of car seat (fig. e).

•Push on front or back of car seat to slide into desired recline position.

•Release recline lever and check that car seat is locked in the recline position.

Recline	(fig. e)
Lever

WARNING

DEATH or SERIOUS INJURY can occur

•Rear-facing car seat must be properly leveled:

-Too reclined can result in injury or ejection.

-Too upright can result in breathing difficulties.

F.Changing Forward-Facing/Rear-Facing Use Position:

Car seat use position is indicated by use position arrows and use position labels on car seat (fig. c).

- Blue for rear-facing.

Use Position Arrow

- Red for forward-facing.	Use Position
	Label	(fig. c)
		(fig. c)
To change use position:
1. Grasp lower front corner of lower	Car Seat
base and side of car seat (fig. d).	Car Seat
base and side of car seat (fig. d).

2.Turn car seat and upper base until use position arrows are in line with use position label section for forward-facing or rear-facing position (fig. d).

Combi 8100 Recline Position Adjustment, Changing Forward-Facing/Rear-Facing Use Position

E.Recline Position Adjustment:

To change recline position:

(fig. e)

DEATH or SERIOUS INJURY can occur

F.Changing Forward-Facing/Rear-Facing Use Position:

(fig. c)

To change use position:

(fig. d)

Front Corner

Lower Base

Rear-facing Forward-facing