Combi 8100 Registration Information, Cleaning Harness Straps, Cleaning Shell, Cleaning Buckle

Page 32

61

Cleaning Seat Pad, Shoulder Harness Covers, and Infant Insert:

Machine wash in cool water and mild soap. Roll in towel to remove excess water and lay flat to dry.

Cleaning Harness Straps:

Surface wash only with mild soap and damp cloth.

Cleaning Shell:

Wipe with mild solution of soap and water. Avoid wetting labels.

Never use “household detergents”: they can weaken plastic.

Cleaning Buckle:

Rinse buckle with warm water. DO NOT use household detergents. Never lubricate buckle.

Section 15 - Registration Information

Child restraints (car seats) could be recalled for safety reasons. You must register this restraint to be reached in a recall. Fill out the registration card attached to car seat or send your name, address, and the restraint’s model number and manufacturing date to:

Combi USA

1962 Hwy 160 West, #100

Fort Mill, SC 29708

or call 1-800-992-6624

or fax 1-803-548-3663

or log onto www.combi-intl.com

For recall information:

Call the U.S Government’s Auto Safety Hotline at 1-800-424-9393 (202-366-0123 in D.C. area)

Log onto the National Highway Traffic Safety Administration recall website at:

http://www-odi.nhtsa.dot.gov/cars/problems/recalls/childseat.cfm

Contact Combi USA (see contact information above)

62

Image 32
Contents Avatar Convertible Car Seat Table of Contents Proper Use Is Required Need help installing your infant car seat? Proper Use Check ListAvatar Car Seat Parts Belt PathUse Recommendations Rear-facing Use 5 to 30 lbs .3 to 13.6 kgSelecting a Vehicle Seating Location Forward-facing Use 20 to 40 lbs to 18 kgOptions For Securing a Car Seat Top Tether InformationLatch System Latch System On This Car SeatSecuring Car Seat To Vehicle Latch System In VehiclesRear-facing For Use 5 to 30 Pounds 2.3 to 13.6 kg Rear-facing InstallationRear-facing Installation With Latch Remove the lower anchor connectors Fig. h Removal Of Car Seat Installed With Latch Storage Of Lower Anchor Belt And ConnectorsRear-facing Installation With Vehicle Seat Belt Fig. a Rear-facing Belt PathRemoval Of Car Seat Installed With Vehicle Seat Belt Fig. eForward-facing For Use 20 to 40 Pounds 9 to 18 kg Forward-facing InstallationForward-facing Installation With Latch Seat back and centered between Vehicle lower anchors fig. d Fig. g Pull to tighten Forward-facing Installation With Vehicle Seat Belt Storage Of Lower Anchor Belt And ConnectorsFig. b Fig. j Securing Child In Car Seat Click Changing Harness Positions Operation and AdjustmentsHarness Use and Adjustment To change harness strap slots To Re-secure Shoulder Harness StrapsChanging Crotch Strap Position Infant InsertRecline Position Adjustment Changing Forward-Facing/Rear-Facing Use PositionTo change recline position To change use positionLatch Changing Belt Path Location To provide a secure installation of the car seatVehicle Seat Belts Belts Forward of Seat Bight FlipLap or Shoulder Belt Mounted on Front Door fig. f Removing Harness Covers, Seat Pad and Infant Insert Care and CleaningAdditional Information Cleaning Harness Straps Cleaning ShellCleaning Buckle Registration InformationAvatar Convertible Car Seat