AT&T 8000 installation instructions Perform the System Test, System Test Hardwired

STEP 21

Perform the System Test

System Test Intrusion Transmitters	1.	Arm the system to the Away ststate using a wireless
		Remote/Transmitter.
	2.	Trip each intrusion transmitter.
	3.	Listen for the appropriate alarm sounding patterns from the
		the Central Controller.
	4.	Use the Wireless Remote/Transmitter to disarm the
		system.
	5.	Press the Messages key on the Central Controller to verify
		that the proper signals were received.
	6.	Call the Central Station to verify that the proper channel
		and account code were received.
System Test Hardwired	1.	Arm the System
	2.	Trip each hardwired loop sensor.
	3.	Listen for the appropriate alarm from the Central
		Controller.
	4.	Disarm the system.
	5.	Press the Messages key on the Central controller to verify
		that the proper signals were received.
	6.	Call the Central Station to verify that the proper channel
		and account code were received.

AT&T Proprietary Information

2-75