CONTENTS
CHAPTER 1 MAINTENANCE AND INSPECTION
A. | Periodically Replaced Parts | 2. Storing and Handling Unsealed | ||
B. | Durables | Cartridges | ||
C. | Periodical Servicing | E. Image Adjustment Basic Procedure | ||
D. | Notes on Cartridge | ..................................................... | ||
| 1. Storing Sealed Cartridges | F. Points to Note |
CHAPTER 2 STANDARDS AND ADJUSTMENTS
1
2
3
A. Mechanical |
1.Image Leading Edge
back of glass) |
2.Image Leading Edge Margin (point of detection for registration)
B. Electrical |
1.Adjusting the Intensity (VR604)
2.Adjusting the AE Mechanism
(VR602, VR603) |
4
5
CHAPTER 3 IMAGE TROUBLESHOOTING
A. Making Initial Checks | ||
1. | Site Environment | |
2. | Checking the Documents |
3.Checking the Copyboard Cover and Copyboard Glass for Dirt
and Scratches |
4.Checking the Lens Array for Dirt
5.Checking the Transfer Charging
Roller |
6.Checking the Feeding Assembly
7. | Checking the Copy Paper | |
8. | Checking the Durables | |
9. | Others | |
B. Samples of Image Faults | ||
C. Troubleshooting.....................................................by Image Fault | ||
|
|
1.The copy is too light (halftone
areas only) |
2.The copy is too light (dark areas
as well) |
3.The copy is too light (extremely
light overall) |
4.The copy has uneven density
(darker at front) |
5.The copy has uneven density
(lighter at front) | |
6. The copy is foggy (overall) |
7.The copy is foggy (paper feed
direction) |
8.The copy has dark lines (paper feed direction, relatively narrow).
9.The copy has dark lines (paper
| feed direction, thin). | |
10. | The copy has white spots (paper | |
| feed direction) | |
11. | The copy has white lines (paper | |
| feed direction) | |
12. | The copy has white spots (cross | |
| feed direction) | |
13. | The back of the copy is soiled. | |
| .............................................. |
6
7
i