APPENDIX
B. Signals/Abbreviations List
What follows below is a list of signals and abbreviations used in the chapters of the manual and circuit diagrams.
The abbreviations within parentheses represent analog signals, which cannot be expressed in terms of ‘1’ or ‘0’.
1. Signals |
|
ACBTP | AC BIAS TIMING PULSE COMMAND |
[AE] | AE SIGNAL |
CBSD | COPYBOARD DRIVE SOLENOID DRIVE COMMAND |
DCBPWM | DC BIAS CONTROL COMMAND |
DCTPWM | TRANSFER DC BIAS CONTROL COMMAND |
DGT0 | OSCILLATION SIGNAL 0 |
DGT1 | OSCILLATION SIGNAL 1 |
DGT2 | OSCILLATION SIGNAL 2 |
HTRD | FIXING HEATER DRIVE COMMAND |
HVPAC | PRIMARY AC BIAS ON COMMAND |
HVPDC | PRIMARY DC BIAS ON COMMAND |
HVPHO | PRIMARY DC BIAS HIGH OUTPUT COMMAND |
HVTDC | TRANSFER DC BIAS ON COMMAND |
KEYR0 | RETURN SIGNAL 0 |
KEYR1 | RETURN SIGNAL 1 |
LAPWM | LAMP DRIVE COMMAND |
[LID] | LAMP INTENSITY DETECTION SIGNAL |
MMCLK | MAIN MOTOR CLOCK PULSE SIGNAL |
MMD | MAIN MOTOR DRIVE COMMAND |
PWOFF | POWER OFF COMMAND |
PWSON | POWER SWITCH ON SIGNAL |
PUSD | |
RELAYED | RELAY DRIVE COMMAND |
RGSD | REGISTRATION SOLENOID DRIVE COMMAND |
[TH1] | THERMISTOR SIGNAL 1 |
TREV | TRANSFER REVERSE DC BIAS ON COMMAND |
VPEAK | VOLTAGE PEAK DETECT SIGNAL |
ZXDP | ZERO CROSS DETECTION SIGNAL |