Nikon MRDI LED Indicator Status Lamp, Hirose HR25-7TR-4P Receptacle, Back View of CAM/CMOS 2K.LS

Page 12

		Table 2.3.1
	Hirose HR25-7TR-4P Receptacle

Pin #		Description

1		Ground

2		5.0 – 6.0V DC

3		No Connection

4		No Connection

If you are using an adjustable lab power supply it is extremely important that you apply the apppropriate voltage to your camera. Incorrect voltage might damage the camera.

Figure 2.3.1

Back View of CAM/CMOS – 2K.LS

2.4 LED Indicator Status Lamp

Table 2.4.1

Light Color	Status

Green	Running

Blinking Amber/Red	Busy with command

Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manual • Rev A • 12 of 41

Image 12

Contents OWL Camera Series CAM/CMOS-2K.LS CAM/CMOS-2K.LS Line Scan Camera Rev a Fairchild Imaging, Inc TerminologyTable of Contents Troubleshooting Handling InstructionsProduct Support Camera Link IntroductionCamera Highlights DescriptionProgrammability UsabilityCamera Specification RDI and Mrdi Performance Specification Full Spectrum of ApplicationsThermal Considerations LinkRDI and Mrdi Responsivity Curve Image Sensor Page Installation Overview Connectors, Pinouts, and CablesCamera Hardware Interface Power Supply Camera Pin # Frame Grabber Pin # Channel Link SignalLED Indicator Status Lamp Hirose HR25-7TR-4P ReceptacleBack View of CAM/CMOS 2K.LS Commands Camera ControlQuick Start with the Camera LinkTM Interface You must cover lens when performing this operation SSM LED Camera Command Summary Command Definition SummaryFour Modes for Synchronizing with the CAM/CMOS 2K.LS GSNSummary of CAM/CMOS-2K.LS Modes Line Start End 2 -- Mode 1 Freerunning 3 -- Mode 2 ExSync Synchronization Data Camera Output ElectShutter Synchronization Timing Values CAM/CMOS-2K.LSCamera Dimensions and Mounting Facilities Mechanical and Optical GuidanceLensing Lens Mount Extender TubePage Page Lenses Positioning Accuracy of the Sensor Chip in the CameraIllumination Light SourcesLens Modeling Cleaning the Sensor Window Handling InstructionsElectrostatic Discharge Preventing ESD DamageTroubleshooting Check the Obvious Things Out FirstUse the Camera Control Interface to Perform Checks Other Areas You Should CheckData Clocking/Output Signals No Output Or Non Specification OutputEverything Seems To Be Working, But No Image Horizontal Lines or Patterns in OutputProduct Support Channel Link is a Widely-Used Signaling Method Camera LinkTM IntroductionVideo Data Signals Camera Control SignalsCommunication Power Port AssignmentsFor More Information on CameraLinkTM Camera Link Connections -- the MDR 26-Pin Connector Figure A.1 Channel Link OperationPage Page Figure A.4 Camera Link Cable