Yamaha RX-SL80 owner manual Bspeaker Level

6Press / repeatedly to select SWFR.

Use / to select YES or NONE.

YES	If you have a subwoofer in your system.
NONE	If you do not have a subwoofer in your
	system.

7Press / repeatedly to select SPEAKERS.

Use / to select the number of speakers connected to the unit. The choices vary as follows:

Choices	Display	Speakers
2 spk	L C R	Front L/R
	SL SB SR

	Front L/R, Center
3 spk	L C R
	SL SB SR

	Front L/R, Surround L/R
4 spk	L C R
	SL SB SR

	Front L/R, Center, Surround L/R
5 spk	L C R
	SL SB SR

8After you have finished the settings, press

repeatedly to select SET CANCEL.

Use / to select SET or CANCEL, then press

ENTER.

SET	To apply the changes and start the test
	tone.
CANCEL	To cancel the changes and return to
	SET MENU.

Use the test tone to check the speaker levels. If you selected SET, the display changes to:

;BASIC SETUP

)S M L )YES NONE

;;;;5spk

.Tone

and the unit outputs a test tone from each speaker in turn.

When the test tone begins, the display changes to:

;BASIC SETUP

)S M L )YES NONE

;;;;5spk

.;;;;YES

Notes

•The unit cycles the test tone around each of the speakers in turn twice.

•The indicator of the speaker currently outputting the test tone flashes in the front panel display.

BASIC SETUP

9Press / repeatedly to select YES or NO, then press ENTER.

If you want to change the speaker level after you hear the test tone select “NO”.

YES	To return to SET MENU.
NO	To enter B)SPEAKER LEVEL.

■Speaker level B)SPEAKER LEVEL

Use this menu to compare and adjust the test tone output from each speaker to the output from the left front (or left surround) speaker so that the volume level for all speakers is identical.

B)SPEAKER LEVEL

.

B)SPEAKER LEVEL

.

Press / to select a speaker and adjust the balance using / .

The unit outputs the test tone from the selected speaker and the left front (or left surround) speaker in turn. The indicator of the speaker currently outputting the test tone flashes in the front panel display.

FR adjusts the balance between the front left and right speakers.

C adjusts the balance between the front left and center speakers.

SL adjusts the balance between the front left and surround left speakers.

SR adjusts the balance between the surround left and surround right speakers.

SWFR adjusts the balance between the front left speaker and the subwoofer.

y

You can also make test tone setting adjustments by pressing TEST on the remote control.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again.

PREPARATION

English

17