Yamaha RX-SL80 owner manual Specifications, Audio Section

Page 59

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

1 kHz, 0.9% THD, 6 Ω

70 W + 70 W

• Maximum Power (EIAJ) for Front, Center, Surround

1 kHz, 10% THD, 6 Ω

100 W

• Input Sensitivity/Input Impedance

200 mV/47 kΩ

EXT IN/OUT, etc

• Output Level/Output Impedance

200 mV/1.0 kΩ

EXT/TV

SUBWOOFER (FRONT SP: SMALL)

2.0 V/1.2 kΩ

•Headphone Jack Rated Output/Impedance EXT IN (DVD/CD, etc.)

1 kHz

100 mV/100 Ω

• Frequency Response

 

 

Front (EXT IN, etc.)

20 Hz to 50 kHz, 0/–3 dB

• Total Harmonic Distortion (FRONT SP OUT)

 

EXT IN (Effect Off), 1 kHz, 35 W/6 Ω

0.04% or less

• Signal to Noise Ratio (IHF-A Network) (SP OUT)

 

EXT IN (Effect Off), Input shorted, 250 mV

100 dB or more

• Residual Noise (IHF-A Network)

 

 

SP OUT, Front L/R

150 µV or less

•Channel Separation (1 kHz/10 kHz) EXT IN, etc., Effect Off, VOL. –30 dB,

1 kHz/10 kHz, 5.1 kΩ terminated

60 dB/45 dB or more

•Tone Control Characteristics [Bass]

Boost/Cut

.............................................................. ±10 dB/60 Hz

[Treble]

 

Boost/Cut

............................................................ ±10 dB/20 kHz

• Filter Characteristics

FRONT, CENTER, SURROUND SP SMALL (H.P.F.)

.............. fc = 40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct.

SUBWOOFER (L.P.F.)

............... fc = 40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct.

VIDEO SECTION

• Video Signal Type

NTSC/PAL

• Video Signal Level

1 Vp-p/75 Ω

• Maximum Input Level

1.5 Vp-p

• Signal to Noise Ratio

50 dB or more

• Frequency Response (MONITOR OUT)

5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range

 

 

[U.S.A. and Canada models]

............................

87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Quieting Sensitivity (IHF)

 

 

Mono (50 dB, 1 kHz, 100% MOD.)

2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

 

 

Mono/Stereo

73 dB/70 dB

• Harmonic Distortion (1 kHz)

 

 

Mono/Stereo

0.5%/0.5%

• Antenna Input

75 Ω unbalanced

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

............................... 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Antenna

Loop antenna

GENERAL

• Power Supply

 

[U.S.A. and Canada models]

AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[China model]

AC 220 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

AC 230 V, 50 Hz

[Asia model]

AC 220-240 V, 50/60 Hz

[General model]

AC 110-120 V, 50/60 Hz

• Power Consumption

90 W

• Standby Power Consumption

 

[U.S.A., Canada and General models]

0.8 W

[U.K. and Europe models]

0.9 W/2.5 W

[Other models]

0.9 W

• Dimension (W x H x D)

435 x 55.5 x 325 mm

(17-1/8” x 2-3/16” x 12-3/4”)

• Weight

6.4 kg

 

(14 lbs 2 oz.)

 

INFORMATION

ADDITIONAL

 

 

 

 

 

 

 

English

 

 

 

 

57

Page 58 Page 60
Image 59
Page 58 Page 60
Contents RX-SL80 Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 5-channel original Yamaha digital power amplifier Sound field featuresPlease check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsOperation buttons Remote control AMP modeInfrared window DSP program / Numeric buttonsEurope models only Using the remote controlHandling the remote control Front panel display Speaker placement Speaker Setup10 mm 3/8 Return the tab to secure the wireSpeaker connections Cable tagsImpedance Selector switch Impedance Selector switchCenter terminals Speaker connectionsFront terminals Surround terminalsAnalog jacks Signal directions and cable indicationsConnections Video 2 jacks on the front panelDigital audio connections Connecting other componentsConnecting a TV Connecting AV componentsOrient the AM loop antenna for the best reception Connecting the antennasConnecting the AM loop antenna Frequency Step Asia and General Models onlyFront panel Remote control Connecting the powerTurning on the power Connecting the AC powerSpeaker set up Basic SetupUsing Basic Setup Basic SetupBspeaker Level Basic operations Press STANDBY/ON to turn on the powerAdjust the volume to the desired output level PlaybackPlaying video sources Background To listen with headphones Silent CinemaTo adjust the tone Audio source Remote controlProgram name Remote control operation Front panel operationPress DSP, then rotate VOLUME/SELECT within 5 seconds Downmixing to 2 channels Listening to unprocessed input signalsStraight Night listening modesLights TuningAutomatic and manual tuning Automatic tuningDisappears Manual tuningFM appears in the front panel display Presetting stationsAutomatically presetting FM stations Hold down VOLUME/SELECT for more than 5 secondsTune into a station Selecting preset stationsManually presetting stations Remote control operationReceiving RDS stations Press u Preset d to select the desired program type Changing the RDS modeTo cancel this function Press PTY Seek Mode to set this unit in the PTY Seek modeEON function SET Menu Manual SetupTo change the Scart SET setting RecordingRemote button Sound Field Program DescriptionsFor movie/video sources Programs Sound Field Sources For music sourcesEnjoying multi-channel software Using the sleep timerAdvanced Operations Listening to high fidelity stereo sound Direct Stereo Enjoying 2-channel softwareWithin 5 seconds Virtual Cinema DSPSelect the input source Displaying information about the input Source Press TEST/RETURN on Using the test tonePress AMP to select the AMP mode Remote controlUse to adjust the optional system parameters Use to quickly setup basic system parameters seeUse to manually adjust speaker and system parameters Use to reassign digital input and select the input modePress / repeatedly to select a menu, then press Enter Changing parameter settingsFactory settings. If this happens, edit the parameter Press AMP, then press SET Menu to enterSurr L/R SP Sound Menu 1/2Center SP Front SPCross Over 02ASUBWOOFER PhaseSubwoofer phase Subwoofer Phase LFE/BASS OUTElfe Level CSP DistanceDcenter GEQ Optical Fdynamic RangeGaudio SET Input MenuMenu shift Menu Shift Binput ModeAdisplay SET Dimmer DimmerCPARAM. INI Bmemory GuardDtuner SET Dscart SETControlling other components Remote Control FeaturesControl area Controlling this unitHold down Code SET while doing steps 2 Setting remote control codesDefault codes Setting a codeVCR Controlling other componentsElements of a sound field What is a sound fieldEditing Sound Field Parameters CT Width Center width Press / repeatedly to adjust the sound field parameterFor 5ch Stereo For PRO Logic II MusicGeneral TroubleshootingNo sound from Or DTS indicatorVolume level Other settings on this Unit cannot be ChangedTuner Remote control Audio formats GlossaryAudio information Video signal informationSound field programs Audio Section SpecificationsVCR DVD NS-P240 NS-P246 NS-P240 Important Safety Instructions FCC Information for US customers For the SW-P240 PrecautionsTable of contents Introduction Package contentsSetting up the speakers Positioning the subwoofer SW-P240 Positioning the center speaker NX-C120To mount the speakers on a wall Mounting the front and surround speakersBasic connection example ConnectionsBefore connecting the cables Connecting speaker cablesAdjust the volume of the entire sound system Pre-adjusting the subwoofer vol- umeSounds. Adjust the amplifier’s volume control to Increase the volume gradually to adjust the volAdvanced Yamaha Active Servo Technology on the SW-P240 For the Subwoofer SW-P240 only Problem Cause What to DoPower plug is not securely Turn the power switch OFF, then Connected Connect the power plug securelyOutput Power Frequency characteristicsDimensions W x H x D WeightAll rights reserved
Top Page Image Contents