Yamaha RX-SL80 Sound Field Program Descriptions, For movie/video sources, Remote button

Page 32

SOUND FIELD PROGRAM DESCRIPTIONS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multichannel playback from almost any sound source (stereo or multichannel). This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. Most of these sound field programs are precise digital recreations of actual acoustic environments found in famous concert halls, music venues, and movie theaters.

y

The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to AUTO (see page 35) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

Notes

This unit’s DSP sound field programs are recreations of real-world acoustic environments made from precise measurements taken in the actual hall, etc. Thus you may notice variations in the strength of the reflections coming from the front, back, left and right.

Feel free to choose a sound field program based on your listening preference, and not purely on the name of the program itself.

For movie/video sources

You can select from the following sound fields when playing movie or video sources. The sound fields marked “MULTI” can be used with multi-channel sources, like DVD, digital TV, etc. Those marked “2-CH” can be used with 2-channel (stereo) sources like TV programs, video tapes, etc.

Remote button

Program

Features

Sources

 

 

 

 

STEREO

STEREO

Downmixes multi-channel sources to 2 channels (left and right) or plays

 

2ch Stereo

back 2-channel sources as is.

 

1

 

 

 

 

 

 

 

MUSIC

MUSIC VIDEO

This program lends an enthusiastic atmosphere to the sound, giving you

 

 

the feeling you are at an actual jazz or rock concert.

 

5

 

 

 

 

 

 

 

 

 

ENTERTAIN

ENTERTAINMENT

This program adds a deep and spatial feeling to video game sounds.

 

 

 

 

6Game

TV THTR

TV THEATER

This program is provided for reproducing monaural video sources (such

 

Mono Movie

as old movies). The program produces the optimum reverberation to

 

7

 

create sound depth using only the presernce sound field.

 

 

 

 

 

 

 

 

 

TV THEATER

Though the presence sound field is relatively narrow, the surround sound

 

 

Variety/Sports

field employs the sound environment of a large concert hall. This effect

 

 

enhances the experience of watching various TV programs such as news,

 

 

 

 

 

 

variety shows, music programs or sports programs.

 

 

 

 

 

MOVIE

MOVIE THEATER

CINEMA DSP processing. This program creates the extremely wide

MULTI

8

Spectacle

sound field of a 70-mm movie theater. It precisely reproduces the source

2-CH

sound in detail, making both the video and the sound field incredibly real.

 

 

 

 

 

This is ideal for any kind of video source encoded with Dolby Surround,

 

 

 

Dolby Digital or DTS (especially large-scale movie productions).

 

 

 

 

 

 

MOVIE THEATER

CINEMA DSP processing. This program clearly reproduces dialog and

 

 

Sci-Fi

sound effects in the latest sound form for science fiction films, thus

 

 

creating a broad and expansive cinematic space amid silence. You can

 

 

 

 

 

 

enjoy science fiction films in a virtual-space sound field that includes

 

 

 

Dolby Surround, Dolby Digital and DTS-encoded software employing the

 

 

 

most advanced techniques.

 

 

 

 

 

 

MOVIE THEATER

CINEMA DSP processing. This program is ideal for precisely

 

 

Adventure

reproducing the sound design of the newest 70-mm and multichannel

 

 

soundtrack films. The sound field is made to be similar to that of the

 

 

 

 

 

 

newest movie theaters, so the reverberations of the sound field itself are

 

 

 

restrained as much as possible.

 

 

 

 

 

 

MOVIE THEATER

CINEMA DSP processing. This program is for reproducing sounds from

 

 

General

70-mm and multichannel soundtrack films, and is characterized by soft

 

 

and extensive sound field.

 

 

 

 

30

Image 32
Contents RX-SL80 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 5-channel original Yamaha digital power amplifierSound field features Other featuresSupplied accessories Installing batteries in the remote controlGetting Started Please check that you received all of the following partsControls and Functions Front panelRemote control AMP mode Infrared windowDSP program / Numeric buttons Operation buttonsEurope models only Using the remote controlHandling the remote control Front panel display Speaker Setup Speaker placementReturn the tab to secure the wire Speaker connectionsCable tags 10 mm 3/8Impedance Selector switch Impedance Selector switchSpeaker connections Front terminalsSurround terminals Center terminalsSignal directions and cable indications ConnectionsVideo 2 jacks on the front panel Analog jacksConnecting other components Connecting a TVConnecting AV components Digital audio connectionsConnecting the antennas Connecting the AM loop antennaFrequency Step Asia and General Models only Orient the AM loop antenna for the best receptionConnecting the power Turning on the powerConnecting the AC power Front panel Remote controlBasic Setup Using Basic SetupBasic Setup Speaker set upBspeaker Level Press STANDBY/ON to turn on the power Adjust the volume to the desired output levelPlayback Basic operationsTo listen with headphones Silent Cinema To adjust the toneAudio source Remote control Playing video sources BackgroundProgram name Remote control operation Front panel operationPress DSP, then rotate VOLUME/SELECT within 5 seconds Listening to unprocessed input signals StraightNight listening modes Downmixing to 2 channelsTuning Automatic and manual tuningAutomatic tuning LightsManual tuning DisappearsPresetting stations Automatically presetting FM stationsHold down VOLUME/SELECT for more than 5 seconds FM appears in the front panel displaySelecting preset stations Manually presetting stationsRemote control operation Tune into a stationReceiving RDS stations Changing the RDS mode To cancel this functionPress PTY Seek Mode to set this unit in the PTY Seek mode Press u Preset d to select the desired program typeEON function Manual Setup To change the Scart SET settingRecording SET MenuRemote button Sound Field Program DescriptionsFor movie/video sources Programs Sound Field For music sources SourcesEnjoying multi-channel software Using the sleep timerAdvanced Operations Enjoying 2-channel software Listening to high fidelity stereo sound Direct StereoWithin 5 seconds Virtual Cinema DSPSelect the input source Displaying information about the input Source Using the test tone Press AMP to select the AMP modeRemote control Press TEST/RETURN onUse to quickly setup basic system parameters see Use to manually adjust speaker and system parametersUse to reassign digital input and select the input mode Use to adjust the optional system parametersChanging parameter settings Factory settings. If this happens, edit the parameterPress AMP, then press SET Menu to enter Press / repeatedly to select a menu, then press EnterSound Menu 1/2 Center SPFront SP Surr L/R SP02ASUBWOOFER Phase Subwoofer phase Subwoofer PhaseLFE/BASS OUT Cross OverElfe Level CSP DistanceDcenter GEQ Fdynamic Range Gaudio SETInput Menu OpticalBinput Mode Adisplay SETDimmer Dimmer Menu shift Menu ShiftBmemory Guard Dtuner SETDscart SET CPARAM. INIRemote Control Features Control areaControlling this unit Controlling other componentsSetting remote control codes Default codesSetting a code Hold down Code SET while doing steps 2Controlling other components VCRElements of a sound field What is a sound fieldEditing Sound Field Parameters Press / repeatedly to adjust the sound field parameter For 5ch StereoFor PRO Logic II Music CT Width Center widthTroubleshooting GeneralOr DTS indicator Volume levelOther settings on this Unit cannot be Changed No sound fromTuner Remote control Glossary Audio formatsAudio information Video signal informationSound field programs Specifications Audio SectionVCR DVD NS-P240 NS-P246 NS-P240 Important Safety Instructions FCC Information for US customers Precautions For the SW-P240Table of contents Package contents IntroductionSetting up the speakers Positioning the center speaker NX-C120 Positioning the subwoofer SW-P240Mounting the front and surround speakers To mount the speakers on a wallConnections Basic connection exampleConnecting speaker cables Before connecting the cablesPre-adjusting the subwoofer vol- ume Sounds. Adjust the amplifier’s volume control toIncrease the volume gradually to adjust the vol Adjust the volume of the entire sound systemAdvanced Yamaha Active Servo Technology on the SW-P240 Problem Cause What to Do Power plug is not securely Turn the power switch OFF, thenConnected Connect the power plug securely For the Subwoofer SW-P240 onlyFrequency characteristics Dimensions W x H x DWeight Output PowerAll rights reserved